What Size Wheel Does a 4.80-12 Tire Fit

Question

Question:

Looking for replacement tire for Load Start 4.80 x 12 with 4 bolt patter on RIM How can I be sure that the TT48012C will fit the rims? The current tires were purchased with rims from Menards if that helps.

asked by: Gianni R

0

Expert Reply:

4.80-12 tires like your current Loadstar tires all fit 12" diameter x 4" wide wheels. This means that your current wheels must measure 12" x 4" so the Taskmaster 4.80R12 Radial Trailer Tire - Load Range C # TT48012C will fit and work as a replacement for your current tires.

expert reply by: Robin H

0

Answer 1

The Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B #AM30590 have a max speed of 65 mph. When trailer tires are not speed rated with a letter, the default is 65 mph max. I've attached an article to…

view full answer...

Answer 2

Your 4.80-12 tire has an overall diameter of 20.5 inches, a 145/80-12 tire will have an overall diameter of 21.3 inches. The fender clearance difference you would see with the taller size would be .4 of an inch. If you can fit an additional .4 of an…

view full answer...

Answer 3

Yes, trailer tires should always be inflated to the maximum psi as listed on the sidewall regardless of the outside temperature or the type of load you have on the trailer. Inflating them to their maximum psi allows them to maintain their load…

view full answer...

Answer 4

Speed rating is definitely something to be aware of. You also want to make sure your tires are properly inflated since that is a common reason for tire failure. For a replacement I recommend getting a radial tire since they are the best for…

view full answer...

Answer 5

It would be too small diameter-wise to replace a 145/80/12 with a 4.80-12. Instead you would need the part #AM10140 for just a tire in the correct size that would work well for you.

view full answer...

Answer 6

The closest radial tire size I would have to replace the 4.80-12 bias tire size is the Kenda Karrier S-Trail ST145R12 Radial Trailer Tire #AM10130. The 4.80-12 bias tire is 20.7 inches tall and 4.9 inches wide. The 145R12 radial tire is 21.3 inches…

view full answer...

Answer 7

The radial tire will run cooler with prolonged use on the highway so if this is going to make up the majority of the use then that is what I recommend using. The greatest chance for failure will be out on the highway as pressure and temperatures…

view full answer...

Answer 8

The only tire pressure we can recommend for a trailer tire, regardless of load, is the max psi listed on the sidewall. The reason for this is it's what the trailer tire manufacturer recommends as this is what will be needed in order to achieve…

view full answer...

Answer 9

We have the Taskmaster Radial trailer tire part #TT48012C in the size you need of 4.80-12 which would work really well. It has a 990 lb weight capacity and also has a higher speed rating. I attached a review video for this tire for you to check out…

view full answer...

Answer 10

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

What Size Wheel Does a 4.80-12 Tire Fit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching