Recommended Front Mount Trailer Hitch Receiver for 2022 Ram 1500

Question

Question:

Looking for a front hitch for my truck to install a surf rod rack basket. Thx

asked by: Scott H

0

Expert Reply:

I recommend the Curt Front Mount Trailer Hitch Receiver # C87FR for your 2022 Ram 1500.

This is a custom fit installation, but please note it is not compatible with Rebel or Diesel engine models

expert reply by: Michael R

0

Answer 1

Yes! I can definitely provide you with a photo of how the Curt Front Hitch #C87FR looks when installed on a compatible Ram model. Please see the attached picture for your convenience. The truck in the picture is a 2020 model. The great thing about…

view full answer...

Answer 2

The Curt Front Mount Trailer Hitch Receiver #C87FR will not interfere with the automatic air dam on your 2021 Ram 1500. See the attached photo which shows the hitch installed on a Ram 1500 like yours. The automatic air dam can be seen in the lower…

view full answer...

Answer 3

I would be happy to answer that question for you. The main difference between the Curt Front Hitch Receiver item #C87FR and the Draw-Tite Front Hitch Receiver Item #65081 is the difficulty in installation. The Curt is way easier to install. You have…

view full answer...

Answer 4

For the 2022 Ram 1500 with the eTorque engine the front hitch you'd want is the Draw Tite part #65081 which I confirmed as a fit for your truck unless it has factory tow hooks. The Curt you mentioned does not fit your truck. At this time Curt…

view full answer...

Answer 5

The weight on the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" part #C87FR is just under 50 Lbs. This is also confirmed to fit your 202 Ram 1500.

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Front Mount Trailer Hitch Receiver for 2022 Ram 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching