Is Adapter Needed with Furrion Vision S System and 2016 Chevy Silverado

Question

Question:

I have a 2016 Chevrolet Silverado 2500 do I need an adapter for my Furrion FOS43TADS Camera?

asked by: Bill B

0

Expert Reply:

This is a good question, but no you do not need an adapter with a 2016 Chevy Silverado 2500HD to use a Furrion Vision S system like the # FOS43TASF that you referenced. It's the newer Chevy trucks that will require it.

expert reply by: Jameson C

0

Answer 1

The 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR is indeed the correct adapter for your 2019 GMC Sierra to use the Furrion camera on your 5th wheel trailer. We do have the 12V PWM Filter for RV Backup Camera…

view full answer...

Answer 2

Yes! The adapter you need is the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR. This adapter was recently manufactured to work with your Furrion system like the #FCE48TASL-05 with your 2021 Silverado. The…

view full answer...

Answer 3

That is exactly what the adapter was designed to do. The Furrion #FR87PR is designed to provide the proper amount of voltage on the running lamp circuit of the 7-way so a camera system will receive enough power to operate reliably. Ford and GM 2019…

view full answer...

Answer 4

Yes, the Furrion 7-way adapter part #FR87PR is the exact solution you need to allow your Furrion Vision S observation system to work with your 2019 Chevy Silverado. Your truck has issues with the Furrion cameras but this adapter was designed to…

view full answer...

Answer 5

There are two solutions for using Furrion Vision S systems like #FOS05TASF with newer GM trucks and you only have to use one of them. If you install the 12V PWM Filter for RV Backup Camera Systems - Hardwire item #VGR64VR which is more of a permanent…

view full answer...

Answer 6

The issue that you're facing with your Furrion camera System can be solved in two ways: 1. By using the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR. This adapter will send a steady current to the camera…

view full answer...

Answer 7

Yes, using the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera, part #FR87PR, will correct for this issue. Furrion's cameras are wired into the running light circuit. The newer GM, Chevrolet, and Ford trucks all have…

view full answer...

Answer 8

The first thing I would check is that the bulbs did not blow out for some reason. This can be done by popping off the lens cover and inspecting the filament. The interior lights are generally ran to an auxiliary battery on the trailer or directly…

view full answer...

Answer 9

Since you are not getting the 12V power when your truck is running, you most likely don't have a fuse issue as you stated their isn't a specified fuse or relay in the owners manual. The issue is that your truck is computerized even at the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Is Adapter Needed with Furrion Vision S System and 2016 Chevy Silverado

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching