Minimum Required Apple IOS and Android Versions to Operate Curt Echo Trailer Brake Controller

Question

Question:

Will this work with iPhone 6s?

asked by: Bob W

0

Expert Reply:

The Curt Echo # C51180 requires Apple 8.0 or newer or Android 4.4 and newer to download and run the Curt Echo app on your smartphone. Your iPhone 6s would have came with 9.0 and can be updated to 15.4 so you will be able to use this trailer brake controller.

expert reply by: Bud M

0

Answer 1

I have a few things for you to check when it comes to not being able to pair your iPhone with the Curt Echo #C51180. The first thing to do is make sure that you're pairing your phone with the Echo through the app. If you paired it through the…

view full answer...

Answer 2

You have to use your phone to set up the Curt Echo item #C51180. You will need to use the app to adjust the brake controller to your vehicle and trailer. If you lose your phone or it dies the echo will continue to work as a proportional controller,…

view full answer...

Answer 3

We do offer a replacement motor #LG-142178 and a replacement gear box #LG-179015 that fit your Stromberg Carlson landing gear 125340 on your Fleetwood Toy Hauler. However, the motor is not user-serviceable and so we do not carry motor sub-components…

view full answer...

Answer 4

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 9

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 10

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 11

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Answer 12

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Minimum Required Apple IOS and Android Versions to Operate Curt Echo Trailer Brake Controller

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching