bing tracking image
Q & A Icon

Weight Distribution Hitch Recommendation For 3,000 lb GVWR Trailer  

Question:

I have a 2016 Range Rover Sport V8 with a factory hitch installed. Do you have a Weight Distribution Hitch that I can use? Here are the specs of my trailer. 6X12 Trailer 2990 LB. GVWR WOOD FLOOR 3 Channel A-Frame Tongue 3 x 2 x 3/16 Angle Main Frame 2 x 2 x 1/8 Angle Top Rail 1.5 x 1.5 x 1/8 Angle Uprights 2 A-Frame Coupler with Safety Chains 2,000 lb. Rated Top Wind Jack 3,500 lb. Rated Idler Axle 3-Leaf Springs ST205x15 Tire and Wheel Assemblies White Mod Wheels Steel Round Fender with Back Treated Wood Floor 72 W x 49 H Rear Ramp Gate Empty Weight: 875 Payload Capacity: 2115 Tire Size: 15 Gate Width and Length: 72 x 49 Overall Length: 194 Overall Width: 96 Deck Length: 144 Deck Width: 76

1

Helpful Expert Reply:

There is a weight distribution hitch you can use with your nearly 3,000 lb GVWR trailer, though I do have to mention that the owners manual of a 2016 Ranger Rover Sport says it is not recommended to use a weight distribution hitch with this vehicle. But if you decide to, what you can use is a hitch from Fastway:

- Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0600

The Fastway # FA92-00-0600 is for total tongue weights between 200 lbs and 600 lbs, which is right in line with your trailer, and comes with everything needed for install except the hitch ball. For that, depending on the size of your trailer coupler, you'll need either 2-5/16" Hitch Ball # EQ91-00-6100 or 2" Hitch Ball # EQ91-00-6080.

expert reply by:
1
Kyle S

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>