Does Rhino Rack Wind Deflector # RR68TB Come with Install Hardware

Question

Question:

Im interested in a product you have Replacement Wind Deflector Fairing for Rhino-Rack Steel Cargo Basket I was wondering if it came with bolts? On the picture or description it doesnt say or show if it does.

asked by: Adriana C

0

Expert Reply:

The Rhino Rack Wind Deflector # RR68TB that you referenced does not come up with install hardware.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Measure the distance between the feet or raised rails on the roof of your vehicle and pick out the Yakima fairing that falls right under that dimension in overall length. We have the part #Y05018 which measures 46 inches long, the part #Y05017 which…

view full answer...

Answer 3

The Replacement Wind Deflector Fairing #RR68TB is 32" long and 4-1/4" wide. It is designed to replace the air deflector on your Rhino- Rack roof mounted steel cargo basket.

view full answer...

Answer 4

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 5

For the Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB, I recommend using the: -Rhino-Rack Rooftop Cargo Bag #RRLB350. The #RRLB500 is too wide and too long to fit on the Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB. Additionally, the…

view full answer...

Answer 6

I was able to look up your order and it looks like the Rhino-Rack Crossbars #RRVA118B-2 and feet #RRRLKVA are going to be a fit for your Infiniti Q50, but you'll need to get a new fit kit #DK378. There should be installation instructions to help…

view full answer...

Answer 7

Since you are going to be no where near the 1,500 lbs or 2,800 lbs tongue weights of those sets of Sumosprings, I recommend going with the 1,500 lbs SumoSprings item #SSR-610-47. You wouldn't notice the difference and the lower capacity option…

view full answer...

Answer 8

To help with the added weight on the back of your 2003 Toyota Tundra, I recommend a suspension enhancement system. The SumoSprings Solo Custom Help Springs Rear Suspension System #SSR-610-40 will work great for improving the handling and safety of…

view full answer...

Does Rhino Rack Wind Deflector # RR68TB Come with Install Hardware

Product Page this Question was Asked From

Continue Researching