What Ball Height Should be Used with Weight Distribution System

Question

Question:

How much taller should ball be set at on truck after leveling the trailer

asked by: Kurt F

0

Expert Reply:

I may not be totally understanding you, but the ball height to use on a weight distribution system like the Curt # C17501 is going to be the height that allows the trailer to sit as level as possible.

expert reply by: Jameson C

0

Answer 1

The extra tongue weight capacity won't matter because your 2019 Ford F-150 Raptor's is below the 1,500 lbs of the SumoSprings item #SS52GR. Having a higher rated system won't increase your truck's capacity. Since you are concerned…

view full answer...

Answer 2

I can confirm that the #SSR-116-40 you were looking at are also a fit on 4wd versions of the F-150, including the F-150 Raptor, but there is a better solution for you. Instead of the #SSR-116-40 which are only rated for 1000-lbs of support, I…

view full answer...

Answer 3

To best determine what Timbren or SumoSprings will work best for your 2011 Ford F-150 Raptor it is best to understand you will be using your trucks. The SumoSprings #SS52GR I find are generally the best for most users. These springs have a 1,500lb…

view full answer...

Answer 4

I'll start out by saying that we do have a solution for your 2018 Ford F-150 Raptor, but the #TDR1500DQ is designed to fit on Ram trucks, so they won't be the correct solution for you. Additionally, there is not a Timbren system that is…

view full answer...

Answer 5

It truly depends on whether you have a 4-inch body lift or a suspension lift on your 2018 Ford F-150 Raptor. If you have a body lift, the SumoSprings Solo Custom Helper Springs - Rear Axle #SS52GR fit and won't be affected by the extra height…

view full answer...

Answer 6

The Timbren Suspension Enhancement System - Rear Axle #TFR150RB will provide great load support but it may feel a little jolt when you hit a bump or pothole. There is not a airbag system for your truck presently, so I recommend instead using the…

view full answer...

Answer 7

The SumoSprings kit part #SS52GR is the correct kit that fits your 2017 Ford F-150 Raptor.

view full answer...

Answer 8

The correct set of SumoSprings Solo Custom Helper Springs for your 2019 Ford F-150 Raptor is part #SS52GR (SumoSprings 142-47). I confirmed this with SumoSprings for you.

view full answer...

Answer 9

I really like the SumoSprings Solo Custom Helper Springs - Rear Axle part #SS52GR for this situation. They engage much more smoothly than the Timbrens part #TFR150RB do. The overall user experience is going to be better for you since you won't…

view full answer...

Answer 10

I had our warehouse measure the Timbren Suspension Enhancement System #TFR150RB for your 2019 Ford Raptor, and it has an overall height of 5-9/16" as shown in the included diagram. The mounting bracket measures 1-1/8" tall, the spacer is…

view full answer...

Answer 11

I have a solution for you, but the SumoSprings Solo Custom Helper Springs #SSR-117-47 are not the correct part for your 2017 Ford F-150 Raptor. Instead, you'll want to use the SumoSprings Solo Custom Helper Springs - Rear Axle #SS52GR, which are…

view full answer...

Answer 12

The rear suspension enhancement I recommend for your 2020 Ford F-150 Raptor is the SumoSprings Solo kit part #SS52GR. This easy to install and maintenance-free kit will give you the support you need for the rear suspension to eliminate the sag but…

view full answer...

What Ball Height Should be Used with Weight Distribution System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching