Replacement Cover for Ventline model v2525

Question

Question:

Which dome/cover would you recommend to replace broken dome on my 2011 Jayco Melbourne 28F (Ventline model v2525 replacement cover)?

asked by: Bill S

0

Expert Reply:

For your Ventline model v2525 you can use the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents # BBC0530-01 (for white) or # BV0554-03 (for smoke).

expert reply by: Scott S

0

Answer 1

For your Ventline Northern Breeze V2525, we have the: -Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BBC0530-01 for white. -Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents #BV0554-03 for smoke. Or -Vent Cover…

view full answer...

Answer 2

Yes we have replacements for the Northern Breeze RV roof vent VB0568 that you have now. For a standard roof vent with a manual lift and no fan we have the #V2092SP-28 and you'd be set.

view full answer...

Answer 3

Thank you for providing the replacement vent lid part number VA530. This was indeed once a valid part that is now obsolete, but we can still help you select a replacement vent lid. Please refer to the linked photo showing the different hinge styles…

view full answer...

Answer 4

Thanks for reaching out to find an answer, I have linked some information below. **Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents - Smoke #BV0554-03. **Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted #FVK1020-19. Vent…

view full answer...

Answer 5

Thanks for the picture! From that I can tell that the correct replacement lid would be the part #BV0554-03. The model number is under the screen on the inside as well

view full answer...

Answer 6

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I spoke with my contact at Ventline and she stated that if you have a newer EZ Lift Ventadome, the correct replacement lid will be part #BVE0108-03. This smoke color lid features a plastic hinge with four mounting points. You can compare the hinge…

view full answer...

Answer 11

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Cover for Ventline model v2525

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching