Can BOLT Hitch Pin Locks Be Used with Blue Ox Tow Bar

Question

Question:

Will 2 1/2Bolt locks work for a blue ox tow bar?

asked by: George T

0

Expert Reply:

Yes, the BOLT trailer hitch lock # BLT99FR can be used to secure a Blue Ox tow bar to a vehicle's hitch.

expert reply by: Jameson C

0

Answer 1

I'm not entirely sure what kind of hitch you have on your Airstream Travel Trailer, but I'm assuming it's a 2" hitch so you could use the Master Lock Trailer Hitch Receiver Lock #1479DAT.

view full answer...

Answer 2

The hitch reducer sleeve I strongly recommend for the 2-1/2" hitch on your 2019 Ford F-250 is the B&W Hitch Receiver Reducer Sleeve #BWRHXA2182 because it has two sets of pin holes to allow for a more custom fit on your Ford hitch. If your…

view full answer...

Answer 3

For securing a 1,500 lb UTV like your Ranger the ShockStrap kit you'd want is the part #297-7RSBB-UTV which includes four 1,000 lb capacity ShockStraps which was designed specifically for UTV applications and would easily have the capacity needed…

view full answer...

Answer 4

For the 2021 Ford Bronco the correct Bolt hitch lock is the part #BLT99FR since the vehicle has a center cut key.

view full answer...

Answer 5

The BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches #BL7018447 will work for all models of your 2021 Ford F-150, and will utilize the center cut key usually found inside the key fob itself. If you do not have a center cut key on…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Can BOLT Hitch Pin Locks Be Used with Blue Ox Tow Bar

Product Page this Question was Asked From

Continue Researching