Is Weight Distribution Needed to Tow 16-Foot Homesteader V-Nose Trailer with 2005 Dodge Ram 2500 4X4
Question:
I have a reg cab dodge 2500 4x4 cummins, I am buying a 16ft cargo trailer that will have about 1500 pounds in the trailer do I need a weight distribution hitch v nose 16 ft 7x16 7 ft high homesteader challenger trailer
asked by: Bruce
Expert Reply:
A weight distribution system is called for under a number of conditions. If your trailer weight (GTW) is more than 50 percent of the tow vehicle weight (GVWR) then often a weight distribution/sway control system will improve handling. Other symptoms of the need for such a system are if the rear of the tow vehicle sags when hitched to the trailer, if the tow vehicle headlights point upward, if steering and stopping are impaired, or if you just want to get the maximum towing capacity from your hitch. The linked article may be helpful as it covers the different types of systems available and their features and benefits.
Please note that to use a weight-distributing system, your trailer hitch must be rated for use with weight distribution. You can check the weight rating label on your hitch to make sure that a weight-distributing capacity is listed. If no rating is listed, a weight-distribution system cannot be used.
I checked the Homesteader website for information about your trailer. Their models 612CS and 712CS both have a curb weight of about 1300-lbs and a gross weight rating (GWVR) of 2990-lbs. According to my research your 2005 Ram 2500 with the Cummins engine has a curb weight of about 7400-lbs. Since the trailer and vehicle weights do not automatically call for a weight distribution system, I suggest you put some road time on this combination to get a sense for the handling. If you are not comfortable with the steering and braking performance, or if you find the trailer sway to be a problem, then you can consider a weight distribution/sway control system.
In the meantime you might also take a few measurements of your trailer frame to check for compatibility. The spring bar brackets of a weight distribution system generally attach to the trailer frame between 20 and 30 inches rear of the hitch ball. Some Homesteader V-nose trailers have a stone guard that sits on top of the A-frame; if your trailer has this feature you may need to select a
system that uses spring bar brackets that bolt to the sides of the trailer frame rather than around it.
For example, Reese offers part # RP58305 for such circumstances.
I have linked you to our product page for systems rated for 300-lb trailer tongue weight, just as an example. Actual fully-loaded trailer tongue weight is the measure needed to select a correctly-matched system for your trailer. You will need to use a tongue weight scale such as the etrailer # e99044 or an alternate method (as outlined in the article provided) to measure the actual loaded trailer tongue weight. Once you know this you can select a system rated appropriately for your trailer.
Products Referenced in This Question
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Video: Review of etrailer Enclosed Trailer Transition Plate - e32JR
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2006 Dodge Ram Pickup
- Video: Kenda Tires and Wheels - Tire with Wheel - AM32424 Review
- Video: Lippert Road Armor Shock Absorbing Equalizer Kit Review
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Shop: etrailer Enclosed Trailer Transition Plate - Universal - 1,000 lbs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Video: Choosing the Right Trailer Wiring
- Search Results: brake controller
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer brake controller
- Article: Trailer Wiring Diagrams
- Video: etrailer Enclosed Trailer Transition Plate Review
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Search Results: fender
- Article: Most Popular Wheel Bearings
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Gooseneck Hitch
- Shop: Suspension Enhancement
on Weight Distribution Hitch
