Recommended 4-Way Wiring Harness for 2022 Genesis GV80

Question

Question:

I have a 2022 Genesis GV80. I am buying a etrailer e65KR but need the wiring kit for the same car. Do you have it available? What is the part number? Thanks for your help.

asked by: Richard A

0

Expert Reply:

We do have options for a wiring harness to go with the etrailer # e65KR on your 2022 Genesis GV80. Since there is no custom fit option, you will need the Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit # C59496. This is a universal wiring harness which will require splicing into your existing wiring for installation. Once installed, you will have a 4-way connection at the back of your vehicle to power your trailer's signal lights.

If you would like to avoid splicing wires, you could also use the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This uses zero-contact interface sensors to identify the current flowing through each wire by clamping onto it.

expert reply by: Robin H

0

Answer 1

I would be happy to! To add a hitch to your 2024 Genesis GV80, I recommend the etrailer item #e65KR. This hitch is custom fit and bolts to your Genesis with included hardware. I really like the etrailer Hitch because the crosstube mounts behind your…

view full answer...

Answer 2

The Adapter Module for BrakeRite Electric Over Hydraulic Actuator #DX35FR was designed for use on the trailer side of the wiring. If you had this installed on the truck wiring the integrated controller would think a trailer is connected all the…

view full answer...

Answer 3

It sounds like you were needing the Adapter #DX35FR but accidentally ordered the adapter with the plug, part #T4845900, is that correct? If so, no worries. You can indeed cut the plug off the adapter and hardwire it as shown in the diagram I…

view full answer...

Answer 4

Yes, we have the 2" etrailer Trailer Hitch Receiver #e65KR is custom fit for your 2023 Genesis GV80. This receiver has a hidden cross tube with a matte black finish for a clean factory look.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Exactly! Both hitches are very similar in design and construction. That is usually what happens when hitches are custom-fit for your vehicle. The main difference is the finish. I personally prefer the matte finish that #e98839 has. We have them on…

view full answer...

Answer 7

To replace your AL-KO 568303 seal you will want the Oil Seal #91030. This seal has the same inner diameter of 2.750 inches and outer diameter of 3.779 inches. It is a confirmed fit for your #99 spindle that uses the AL-KO 568303 seal.

view full answer...

Recommended 4-Way Wiring Harness for 2022 Genesis GV80

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching