Cargo Carrier Recommendations For My 2017 Chevrolet Silverado 1500

Question

Question:

Hi, a few questions.. Will the C18100 19x60 Curt Cargo Carrier for 2 Hitches - Aluminum - Folding and PC3 Pin and Clip for 2 and 2-1/2 Hitches - 5/8 Diameter x 3-1/4 Span work with my 2017 Silverado 1500 LT Double Cab? Also, does the carrier have holes for attaching a license plate? What reflector options would you recommend? Thank you

asked by: Frankie P

0

Expert Reply:

The 19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs # C18100 will work on your 2017 Chevrolet Silverado 1500 if you have the 2 inch hitch receiver already installed on your vehicle. The carrier is 60 inches long by 20 inches wide and it has an easy 2-piece, bolt-together assembly. The Pin and Clip for 2 inch and 2-1/2 inch Hitches - 5/8 inch Diameter x 3-1/4 inch Span # PC3 will work with the cargo carrier and 2 inch hitch. You could also use The Anti-Rattle Trailer Hitch Receiver Lock for 2 inch Hitches - 3-1/2 inch Span # 63232. It gives you the locking option and has the ability to reduce play and vibration in the hitch connection.

The cargo carrier does not have holes to attach a license plate but you could always drill holes in it to attach one but it will affect the warranty. When it comes to the reflector options I recommend The 7 inch Long White/ 11 inch Long Red Conspicuity Reflective Tape - (4) 18 inch Strips # RE418T.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

If you are using the Kuat Transfer V2 Bike Rack for 1 Bike #KU64FR for a 2-inch hitch, I confirmed with Kuat that you will need the #HL1 because of the 1-1/4 adapter sleeve that comes with the rack.

view full answer...

Answer 2

The Kuat Transfer 1 bike rack part #KU64FR that you referenced will stick out 28 inches from the center of the hitch pin hole it is installed in. So what you'll want to do is measure from the center of your hitch pin hole out 28 inches and…

view full answer...

Answer 3

The Kuat Transfer V2 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #KU84FR comes with a tamper-resistant bolt that tightens the carrier to a 2" receiver and you need to use the included security wrench to remove or install. So…

view full answer...

Answer 4

As happens sometimes, there is really no discernable difference between the two trailer hitch receivers that fit your 2022 Hyundai Tucson, which are the following from Curt or Draw-Tite: - Draw-Tite Max-Frame Trailer Hitch Receiver #DT22MR - Curt…

view full answer...

Answer 5

After installing the Curt Trailer Hitch Receiver #C94WR onto your 2022 Hyundai Tucson SEL and installing the Kuat Transfer Bike Rack #KU64FR for extra security I would also purchase the Hitch Lock #HLT. This lock also has an anti rattle device that…

view full answer...

Answer 6

If you are installing the Kuat Transfer V2 1-bike carrier #KU64FR onto a 2" hitch receiver, then you will want to use Hitch Lock #HL2. If you are installing this bike carrier onto a 1-1/4" receiver then use Hitch Lock #HL1. If you…

view full answer...

Answer 7

A hitch ball and a hitch pin and clip each serve a different purpose. A hitch ball, like #19247, attaches to the ball mount, like #C45010, using a large nut that threads on from the bottom, kind of like a nut and bolt. This ball is what the trailer…

view full answer...

Answer 8

Yes, you're on the money because the most popular B&W Tow & Stow ball mount for 2 inch hitchers is indeed the one that has a maximum of 5 inches of drop or 5-1/2 inches of rise. There are actually two versions of this, one being a 2-ball…

view full answer...

Answer 9

Curt has a hitch that fits your 2022 Hyundai Tucson with the part #C94WR but the #C13240 does not fit your vehicle. If you need trailer wiring too you'd want the part #CU94FR.

view full answer...

Answer 10

For your 2022 Hyundai Tucson we only have the Class III hitches like the etrailer part #e38KR which is the more popular 2 inch hitch size. It does have more weight capacity than you'd need but it also is the hitch size that most accessories like…

view full answer...

Answer 11

Either the Kuat Tranfer 1 #KU64FR or the RockyMounts MonoRail Solo 1 #RKY10007 would handle the bikes you describe easily. Both would hold the bikes by the tires, so the fact that the rack won't come into contact with the frame will work well…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...