Parts Needed to to Use Motor Heads on the HappiaJac 4200 Series

Question

Question:

Just want to sure if this works with Happy Jack 4200?

asked by: Mike S

0

Expert Reply:

The HappiJac 4200 are the manual jacks. We do have the upgrade kits available. The Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems # LC733960 are compatible with the 4200 series if you are replacing motor heads or your camper is already prewired for the electric jacks.

If you camper is not already prewired then you would want the Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 which contains the wiring and other components needed for the conversion.

expert reply by: Scott S

0

Answer 1

We do have the #LC733960-182524 without the wiring kit with jus the #LC733960. This is the motors, circuit board, and remote setup like you are looking for.

view full answer...

Answer 2

Based on the Happijac setup you have the correct electric upgrade kit you'd need is the #LC733960-182524.

view full answer...

Answer 3

The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems Item #LC733960-182524 has everything you need to convert to electric jacks and will not require any special tools to install.

view full answer...

Answer 4

It looks like the HappiJac 4100 series jacks had 34.5" of travel, and there are some parts available to replace things in a pinch, but with newer trucks getting taller it might be wise to upgrade to a whole new set of jacks. I recommend taking a…

view full answer...

Answer 5

The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack System #LC733960-182524 is a fit for HappiJack manual jack system 4220 or 4820. The HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs #LC736514-ELKIT or the…

view full answer...

Answer 6

The Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems part #LC733960 is only compatible with the 4220 and 4820 models. If you wish to upgrade to electric you will need a new system, the HappiJac…

view full answer...

Answer 7

It is not recommended to use the new Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems #LC733960 on the 4160 jacks. The reason is that the 4160 is a 2 piece construction acme screw drive, and the roll…

view full answer...

Answer 8

I spoke with HappiJac, and they said that the electric motors in the: -Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems #LC733960-182524 are 12VDC and are not rated for AC power. He went on to mention that even if you used a…

view full answer...

Answer 9

Yes, the Replacement Motor Heads w Circuit Board and Remote #LC733960 will allow you to replace your 4800 electric motors and will give you a wireless remote to make controlling the jacks easier.

view full answer...

Answer 10

The heads that come with the Replacement Motor Heads w Circuit Board and Remote #LC733960 measure 9-1/8" from the bolt hole that connects them to the legs up to the topmost part of the motor (see attached). Hopefully this will be enough…

view full answer...

Answer 11

Based on what you have now the kit to convert your manual Happijac kit to electric you'd need is the part #LC733960-182524 and you'd be set.

view full answer...

Answer 12

You will most likely need the Replacement Motor Heads w Circuit Board and Remote #LC733960. These are a direct fit for 4150, 4220 and 4820 series jacks. As you mentioned you already have the Wiring #LC182524 you will not need the full…

view full answer...

Parts Needed to to Use Motor Heads on the HappiaJac 4200 Series

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching