Will Replacement Motor Heads w Circuit Board and Remote Work On HappiJac 4160 Model

Question

Question:

I noticed a previous answer to someone stating this LC33960 motor conversion kit would work on a 4160 jack, but in the product description, the 4160 is not included. Can you verify this kit would work for my jacks that are 4160? Thanks

asked by: Cynthia

0

Expert Reply:

The Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems part # LC733960 is only compatible with the 4220 and 4820 models. If you wish to upgrade to electric you will need a new system, the HappiJac Electric Truck Camper Jack System part # LC736514-ELKIT which is confirmed to replace the 4160 model.

expert reply by: Conner L

0

Answer 1

It is not recommended to use the new Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems #LC733960 on the 4160 jacks. The reason is that the 4160 is a 2 piece construction acme screw drive, and the roll…

view full answer...

Answer 2

The HappiJac 4200 are the manual jacks. We do have the upgrade kits available. The Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems #LC733960 are compatible with the 4200 series if you are replacing…

view full answer...

Answer 3

The heads that come with the Replacement Motor Heads w Circuit Board and Remote #LC733960 measure 9-1/8" from the bolt hole that connects them to the legs up to the topmost part of the motor (see attached). Hopefully this will be enough…

view full answer...

Answer 4

The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack System #LC733960-182524 is a fit for HappiJack manual jack system 4220 or 4820. The HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs #LC736514-ELKIT or the…

view full answer...

Answer 5

Based on what you have now the kit to convert your manual Happijac kit to electric you'd need is the part #LC733960-182524 and you'd be set.

view full answer...

Answer 6

It looks like the HappiJac 4100 series jacks had 34.5" of travel, and there are some parts available to replace things in a pinch, but with newer trucks getting taller it might be wise to upgrade to a whole new set of jacks. I recommend taking a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Will Replacement Motor Heads w Circuit Board and Remote Work On HappiJac 4160 Model

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching