Replacement Operating Mechanism for MaxxFan 4700K

Question

Question:

Hello, We have model 2012-09-4700K-0080 maxxFan Wall Control Model Series 03600K-0365K Do you carry the operating mechanism for this model?

asked by: Christine

0

Expert Reply:

From the numbers you provided it sounds like you have a MaxxFan 4700K model fan. The Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents # MA10-20281K-1AF is the correct replacement for the MaxxFan 4700K's.

expert reply by: Scott S

0

Answer 1

I had one of the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF opened, and the internal gear does have teeth. I included a picture of one of these opened up for you to check out as well.

view full answer...

Answer 2

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if…

view full answer...

Answer 3

For your MaxxAir model 8900K, we have the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF and the Replacement Lift Arm for MaxxFan Roof Vents #MA10-20222KS. From your pictures and what you…

view full answer...

Answer 4

I have an answer for you. While we cannot guarentee the issue, one of the most common issues with your MaxxAir model 4751 ks is that even if it sounds like the operating mechanism is working, it is skipping a gear on the operating mechanism. The…

view full answer...

Answer 5

I've attached an exploded diagram photo of the vent assembly that uses the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF for you to check out. You'll need to use it as a guide…

view full answer...

Answer 6

Yes the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF that you referenced does fit the MaxxFan vent you have with serial number 2014-02-4751ks-a0157.

view full answer...

Answer 7

If your original MaxxAir fan did not come with a remote like #MA00A01150K then you will need to upgrade your old unit with something like the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote #MA00-07500K. The Replacement Handheld Remote…

view full answer...

Answer 8

The Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF is the same exact same as the 10a20281k-1af you are looking for.

view full answer...

Answer 9

Is the jack retracting at all? The Lippert Ground Control 3.0 #LC358590 front jacks should be retracting all the way under normal operation so if one of them isn't then you need to try retracting it manually by removing the plug on the motor and…

view full answer...

Answer 10

The noises you described in your question along with the "Out of Stroke" error message you're getting might be indicating some internal damage with the gears on the jack leg(s). The "Out of Stroke" error basically means that…

view full answer...

Answer 11

It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…

view full answer...

Answer 12

The correct replacement operator mechanism for a MaxxFan Deluxe Roof Vent is the Replacement Operator Mechanism part #MA10-20281K-1AF. I really wish I could provide you with exact step by step instructions for replacement but the manufacturer simply…

view full answer...

Replacement Operating Mechanism for MaxxFan 4700K

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching