Can Hollywood Racks RV Rider be Used at Rear of Motorhome, RV, and Flat Towed Vehicle

Question

Question:

HLY64FR bike rack - is this the Hollywood HR1700? Warrantee? Good for towing on an RV, Motorhome and flat tow on a tow vehicle? Thank you,

asked by: Kathy

1

Helpful Expert Reply:

Yes, the Hollywood Racks RV Rider part # HLY64FR is the same as the HR1700. This has a limited lifetime warranty and can be used at the rear of a motorhome, RV, and flat towed vehicle.

expert reply by: Jameson C

1

Answer 1

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Answer 2

For an e-bike rack that has enough weight capacity for your bikes and is rated for use at the rear of a motorhome as well as the vehicles you mentioned you'd want the Hollywood Racks RV Rider #HLY64FR. The clamp design of this rack works great to…

view full answer...

Answer 3

The Hollywood Racks RV Rider Bike Rack #HLY64FR is rated for RV use and will work with most RV's. The easiest way to determine your clearance would be to measure the distance from the hitch pin hole on your RV's hitch. The closest point on…

view full answer...

Answer 4

The Hollywood Racks RV Rider part #HLY64FR is rated for use at the rear of a motorhome like what you have so it would work great for your application.

view full answer...

Answer 5

Sounds like what you are looking for is the Roadmaster High Low Adapter part #RM-077-4 which will provide you with the 4 inches of drop you need plus an additional hitch opening above for a hitch bike rack to install.

view full answer...

Answer 6

Yes, the Hollywood Racks RV Rider Bike Rack #HLY64FR is the same as the HR1700 Hollywood Racks RV Rider Electric Bicycle Hitch Rack you mentioned, we just have a different part number for our website, but this is the same bike rack.

view full answer...

Answer 7

If you are worried about the possibility of a bike rack hitting your flat towed 2013 Toyota Tacoma, then a few quick measurements might help. Hollywood Racks RV Rider Bike Rack #HLY64FR, measures 32 inches from the center hitch pin hole to the…

view full answer...

Answer 8

Yes! Our part number #HLY64FR is the same as the Hollywood Racks part number HR1700. These both correspond to the Hollywood Racks RV Rider. As far as clearing your spare tire on your Jeep Wrangler, there is a definite way to tell if you have enough…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Can Hollywood Racks RV Rider be Used at Rear of Motorhome, RV, and Flat Towed Vehicle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching