Will Curt Hitch Mess With Foot Operated Rear Lift Gate

Question

Question:

Will this work for a 2022 Jeep Compass Limited with a foot operated rear lift gate?

asked by: Jerry S

0

Expert Reply:

When installing # C13363 you will not run into any issues when it comes to the foot operated rear lift gate on your 2022 Jeep Compass. Below is a video of one being installed on a 2020, but it is the same installation process.

expert reply by: Noah E

0

Answer 1

Installation of the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e48AR will not require any drilling on your 2021 Jeep Compass. This features a bolt-on installation and uses existing holes in the frame.…

view full answer...

Answer 2

Anytime a hitch is installed, such as the Curt Trailer Hitch #C13171 that fits your 2019 Jeep Cherokee, there is the possibility that it could affect the hands-free liftgate. This means the functionality could be lost, but many times it simply means…

view full answer...

Answer 3

Yes, there is a hitch available for your 2023 Jeep Compass. I recommend the etrailer Hitch item #e48AR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube is hidden behind the rear…

view full answer...

Answer 4

Yes, the Curt hitch part #C13363 does fit your 2019 Jeep Compass Trailhawk edition. I attached a picture a customer sent us that shows it installed on a Trailhawk just like yours. I also attached an install video too. If you are looking for a 2-bike…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13363 is going to require some minimal trimming to the rear bumper as well as the heat shield to fit the receiver tube out. I've attached a video where Robert will walk you…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver #C13363 is designed to fit all models of the 2021 Jeep Compass so it will fit your 2021 Jeep Compass Trackhawk perfectly. This hitch has a 600lb tongue weight rating and 4000lbs trailer weight rating making it a…

view full answer...

Answer 7

Yes, when installing the Curt Trailer Hitch Receiver #C13363 the heat shield and fascia will both need to be trimmed. No drilling is required, this has a bolt-on installation. Since you will be towing, you probably want a 4-way connection to power…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Will Curt Hitch Mess With Foot Operated Rear Lift Gate

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching