Replacement Hub and Drum Assembly for 2011 Aluma Trailer 8218
Question:
I have a 2011 Aluma trailer model 8218. The VIN # is 1YGHD1826CB074858. It has 14 wheels with 5 on 4.5 bolt pattern. I am looking for the complete hub and drum brake assembly. Which part number do I need? -Thanks
asked by: Renato S
Expert Reply:
I reached out to Aluma Trailers and found that you have a 3,500 lb axle that uses a # L68149 inner and # L44649 outer bearing. Based on this information you will be able to use the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-K you were looking at. This assembly uses the same bearings and has the 5 on 4-1/2 bolt pattern you are need for your wheels.
For brakes, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These have a 4 bolt brake mounting flange pattern and are made for 3,500 lb axles. These are self-adjusting brakes so they do not require periodic manual adjustment like standard brakes.
I have attached some review and installation videos for your reference.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: akhd~545~2~ez~1k
- Search Results: dexter 8 257
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44643 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44643 - Pre-Greased
- Q&A: How to Determine Correct Replacement Hubs, Drums and Brakes for Travel Trailer
- Video: Performance Tools Bearings, Races, and Seals Installation Set Review
- Shop: Alpha Systems Mylar-Backed Butyl Tape for RV Walls - 90' x 3" x 1/32"
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: RV Roof Membrane
- Q&A: Does the Replacement Vacuum Breaker Kit Fit a Dometic 300 Series 9108765622 Toilet
- Q&A: Vacuum Breaker Positioning On The Dometic 310 RV Toilet
- Video: Kodiak Disc Brake Kit Installation K2HR712DS
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Search Results: 25580
- Shop: Brake Controller
- Search Results: dust cap