Solution for Needing Replacement Head for Curt A25 Fifth Wheel Hitch

Question

Question:

I have a CURT A25 is it possible to buy just the head? The top plate on mine got Bent and the bolts are bent. Thanks,

asked by: Charles W

0

Expert Reply:

For the Curt A25 fifth wheel hitch # C16180 the only solution for a replacement head would be with the Replacement Head Unit part # C16580 that you mentioned as just the head is not available.

expert reply by: Jameson C

0

Answer 1

If you have the Curt Q25 hitch head #C16565, there have been many people who have had a similar issue. Curt came out with another hitch head the A25 #C16580 which has a better latch system and a different pivoting system. This hitch head is able to…

view full answer...

Answer 2

The B and W Flat Bed Fifth Wheel Hitch part #BWRVK3050 will set 10-1/2 inches above the deck height of the flat bed truck it is installed in. I attached a review video for this hitch for you to check out as well.

view full answer...

Answer 3

It sounds to me like the jaws on your Curt Q25 5th Wheel Trailer Hitch - Dual Jaw - 25,000lbs Item #C16265 need to be greased or that you may have backed into the king pin with the jaws not locked in the coupling position and could have damaged the…

view full answer...

Answer 4

Yes absolutely! The Replacement Head Unit for Curt A25 5th Wheel Trailer Hitch #C16580 will work great with the: -Curt R24 Round Tube Slider for Q24 5th Wheel Trailer Hitches #C16570. You will however be limited to the 24K capacity of the slider…

view full answer...

Answer 5

Essentially all 5th wheel hitches now have articulating or fully pivoting heads, though we do offer replacement heads with the weight rating you are looking for, and I will list all of them for you below: - Replacement Head Unit for Curt Q25 5th…

view full answer...

Answer 6

The main difference between the Curt A25 5th Wheel Trailer Hitch part #C16180 and the Curt Q25 5th Wheel Trailer Hitch part #C16265 is the hitch head. The head on the A25 is far superior to the head on the Q25 because it has an interlocking jaw…

view full answer...

Answer 7

I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured also.…

view full answer...

Answer 8

When wiring a trailer connector, it is best to wire by function, as wire colors can vary. We have an excellent wiring diagram on our website, I will provide you a link so you can look at it. If you are looking at the inside of the trailer connector…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Solution for Needing Replacement Head for Curt A25 Fifth Wheel Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching