Replacing Propane And Carbon Monoxide Detectors.

Question

Question:

I look for this Item Protechtor professional high detector 2001 please what is the price

asked by: Martha O

1

Helpful Expert Reply:

I have a solution for you.

The Protechtor you are looking for is no longer available.

However you can use the 3-Wire Propane Gas and Carbon Monoxide Detector for Thor Motorhomes - 12 Volt - Black # RS34FR.

Just make sure it is 18 inches or lower to the ground so it can properly do its job and keep you safe.

expert reply by: David B

1

Answer 1

Yes, the 2-Wire RV Propane Gas and Carbon Monoxide Detector, #RS54FR has two different mounting brackets to select from allowing coverage of the existing hole from previous installs. Please note the attached product review video.

view full answer...

Answer 2

I wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector #RS64FR in white, or #RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas…

view full answer...

Answer 3

The Atwood RV Carbon Monoxide and Propane Gas Detector #AT36681 has three wires though you only need to use two of them - a red for power and black for ground. The other red wire is for an optional back-up power source which is not necessary for…

view full answer...

Answer 4

It's a very smart idea to replace your out-of-date ProTECHtor Series 2001 and the Atwood RV Carbon Monoxide and Propane Gas Detector - 12 Volt - White #AT36681 is the perfect option for a replacement. In regards to a fit, based on my research the…

view full answer...

Answer 5

I'm not aware of a way to reset a ProTechTor propane leak detector, but this unit is somewhat obsolete at this point so I do recommend replacing it. The Atwood model you've mentioned is no longer available but the 2-Wire RV Propane Gas and…

view full answer...

Answer 6

I suggest the 2-Wire RV Propane Gas and Carbon Monoxide Detector, #RS54FR for black or #RS34FR for white.

view full answer...

Answer 7

As long as you don't have a propane leak, then it is a good idea to replace the unit. A great upgrade for this unit is the RV Propane Gas and Carbon Monoxide Detector #RS34FR for white. Or RV Propane Gas and Carbon Monoxide Detector #RS54FR for…

view full answer...

Answer 8

We have two different sets of 3 inch waste valve seals. We have the part #T1003-7VP which is for the new style Valterra valves and the part #T1003-9VP which fits the older style

view full answer...

Answer 9

For a 3 inch waste valve, you'd want to use the Valterra #T1003-7VP kit. The #T1002-7VP kit is for 2 inch valves, and wouldn't work with your 3 inch valve.

view full answer...

Answer 10

Yes, for the Valterra Bladex 3 inch waste valves on your 2015 Montana, you do have the correct replacement seals, which are the following: - Replacement Seals and Hardware for 3" Bladex Waste Valves #T1003-9VP

view full answer...

Answer 11

We have #T1003-7VP which is the older style 3” seal kit for valves made prior to 2000. But if you have a newer unit, you need part number #T1003-9VP that is the newer style 3” seal kit for current valves made after 2000.

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacing Propane And Carbon Monoxide Detectors.

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching