Can Thule Lock Cylinders be Used for a Rhino-Rack Product

Question

Question:

Do Thule. Cylinders for Rhino bars?

asked by: Colin D

0

Expert Reply:

The Thule cores are unique same as the Rhino-Rack cores are unique so they aren't interchangeable. If you're needing to add locks to the ends of your Vortex Aero Crossbars you can do so with the Kit # RRVA-LEC4.

Rhino-Rack has some other locking accessories so if you were looking at something else just let me know and I'll see if they make replacement locks for it.

expert reply by: Jon G

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 6

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 7

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

My Retrax representative has confirmed that the Rhino Rack #RRVA180B-RRRLT600 roof rack quick disconnect feet and the 71 inch crossbar are indeed compatible with the accessory slots in the rails of your Retrax Pro XR tonneau cover. I've snipped a…

view full answer...

Answer 10

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 11

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Can Thule Lock Cylinders be Used for a Rhino-Rack Product

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching