Trailer Hitch Receiver Fit For 2022 Mini Cooper Countryman John Cooper Works

Question

Question:

Looking for a 1.25” hitch option for a 2022 JCW Countryman. Thank you.

asked by: Bruce T

1

Helpful Expert Reply:

We do indeed have a trailer hitch receiver that fits your 2022 Mini Countryman John Cooper Works, and it is a 1-1/4" receiver like you were wanting. The correct fit for your '22 JCW Countryman is the following:

- Curt Trailer Hitch Receiver # C11522

I did verify the fit of the # C11522 directly with the manufacturer for you.

expert reply by: Kyle S

1

Answer 1

I checked with Curt and the specify that the Curt hitch part #C11522 that you referenced does fit the 2018 Mini Cooper Countryman John Cooper Works edition like what you have so it will fit and work well.

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C11522 is confirmed to fit on your 2022 Mini Countryman John Cooper Works edition. I do recommend installing the Curt Powered Tail Light Converter #C59236 when you install the receiver. This will give you a 4-way…

view full answer...

Answer 3

The EcoHitch #306-X7387 is specifically designed for the 2019 Mini Countryman, it won't fit any other vehicles. Also, from looking at the installation instructions, it looks like there are some cutting and modifications necessary for the…

view full answer...

Answer 4

I wish we had an install video for the Curt hitch you mentioned but at this time we have not had a chance to install it on a vehicle. The install difficulty is listed as a 10 of 10 but you should note that the rating has more to do with time that the…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Trailer Hitch Receiver Fit For 2022 Mini Cooper Countryman John Cooper Works

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching