Trailer Hitch Receiver Fit For 2021 Lexus RX 450h

Question

Question:

will it also fit a 2021?

asked by: Robert L

0

Expert Reply:

Yes, the Curt trailer hitch receiver does fit your 2021 Lexus RX 450h, which is the following part number:

- Curt Trailer Hitch Receiver # C73DR

The only other thing I wanted to mention is that if you plan on using this hitch for towing and need a wiring harness, the correct fit for your '21 RX 450h is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118255.

expert reply by: Kyle S

0

Answer 1

We do have a trailer hitch receiver that is a fit for your 2021 Lexus RX 450h, from Curt: - Curt Trailer Hitch Receiver #C73DR

view full answer...

Answer 2

Aside from what you already found, the best advice I can offer comes from another customer who installed the #118255 on an RX 350. On the inside corner cover, pry up the center of the black plastic fastener and remove it. Reach under the cover with…

view full answer...

Answer 3

Yes, for your 2016 Lexus RX 350 that does not have the factory tow package the correct trailer wiring kit you need is the part #118255.

view full answer...

Answer 4

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118255 is designed for a 2017 Lexus RX 350 without a tow package. Since the vehicle does not have a tow package there should be a 10-pin connector located behind the rear…

view full answer...

Answer 5

Judging by the picture you sent in it looks like you are trying to use the wrong connector to install the #118255 in your 2019 Lexus RX 350. I attached a picture to this page as well that shows your connector pictured very close to where the…

view full answer...

Answer 6

If your 2017 Lexus RX 350 didn't come with the factory tow package then an additional harness with a powered converter is needed to actually activate the plug that you used to install the Tekonsha T-One Vehicle Wiring Harness #118252. This…

view full answer...

Answer 7

Yes, the Curt hitch part #C56434 fits all models of the 2021 Lexus RX 450h.

view full answer...

Answer 8

We did have someone install the Draw-Tite Max-Frame Trailer Hitch Receiver #75540 on their 2022 Lexus RX 450h. While they did make it fit it did require them to do some additional trimming on the plastic shrouds under the vehicle and the exhaust was…

view full answer...

Answer 9

I have taken a look at the Draw-Tite Max-Frame Trailer Hitch Receiver item #75540. This hitch is confirmed to fit your 2022 Lexus RX 350 and it does require some minor trimming of the lower portion of the rear trim. I have linked a couple of pictures…

view full answer...

Answer 10

There there are two things that will help you find the install connectors on your vehicle to install this harness #118255. 1. The T-One Vehicle ModuLite portion with the in-line fuse holder connects through the rear cargo area on the passenger side.…

view full answer...

Answer 11

Finding the 10-pin connector to install the Tekonsha trailer wiring harness part #118525 that you mentioned on a 2018 Lexus RX 450h L is sometimes a bit challenging but we've had some customers come back and give us tips on where to find it. One…

view full answer...

Answer 12

For your 2022 Lexus RX 350 the Curt T-Connector Vehicle Wiring Harness #56083 will connect to the factory tow package with no other parts required. This will give you a 4-way flat trailer connector on your Lexus. Currently the T-One Vehicle Wiring…

view full answer...

Trailer Hitch Receiver Fit For 2021 Lexus RX 450h

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching