Could Atak Motion Light Work Well to Illuminate RV Steps

Question

Question:

Would this be a good choice for light ing my steps

asked by: Don C

0

Expert Reply:

Yes, the ATAK Solar Motion Light # PT700 would work great to illuminate your steps on your RV. It puts out 350 Lumen so it's very bright, is motion activated so it would always come on when needed and since it's solar powered the install is easy.

expert reply by: Jameson C

0

Answer 1

The Trailer Valet XL Trailer Dolly with Chain Drive #TVXL2 that you are looking at actually has solid rubber tires that use deep treads so you can use it on tricky surfaces like gravel, dirt, or grass. It is meant for use on pavement or well packed…

view full answer...

Answer 2

Thanks for reaching out! The NightMinder RV Task Light #NM-Motion-011 is designed for internal use so since you're wanting to use a motion activated light on the outside of your trailer I recommend checking out the ATAK Solar Motion Light #PT700…

view full answer...

Answer 3

If you have already added the fuse and the trailer charge circuit is not activated in the 2019 Ford F-350 Super Duty with factory integrated brake controller, then you want to make sure the trailer is connected and you press the brake according to a…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 11

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 12

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Could Atak Motion Light Work Well to Illuminate RV Steps

Product Page this Question was Asked From

Continue Researching