Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans

Question

Question:

Does this fit all in/out vents or do I need to look for a model number. I know its a Maxxair and this looks like my remote did.

asked by: Edd

0

Expert Reply:

To be sure, you will want to look for a model number. The Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans # MA00A01150K will work with the below listed models:

MaxxAir MaxxFan Plus (model number MA00-04500K)
MaxxFan Deluxe (model numbers MA00-05100K, MA00-06200K, MA00-07000K, or MA00-07500K)

If you discover that you do not have one of the above listed models, please let me know what model you have and I would be happy to help you find the correct remote.

expert reply by: Scott S

0

Answer 1

Since you haven't lost any functionality in your fan and you already replaced the batteries the remote itself could be bad. The replacement remote is the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 #MA00A01150K.…

view full answer...

Answer 2

I spoke with my contact at Lippert regarding your Kwikee Series 32 Step Assembly. I gave him all the information you provided regarding your step assembly, along with the information from the picture you attached. He was able to confirm that the…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

I checked the manual and also reached out to Blue Ox to confirm this but found no notes and Blue Ox stated that the Blue Ox Base Plate Kit #BX1739 would be a compatible fit for your 2020 GMC Sierra 3500 (diesel). If you haven't picked out the…

view full answer...

Answer 10

The Air Lift WirelessONE Compressor System #AL25980EZ and Air Lift WirelessONE Compressor System #AL25980 are nearly identical with only some very minor differences in CFM and duty cycle ratings. The #AL25980EZ will also come with an easier mounting…

view full answer...

Answer 11

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Handheld Remote for MaxxAir Roof Vent Intake/Exhaust Fans

Product Page this Question was Asked From

Continue Researching