Can Lippert Smart Jack be Rotated on Mounting Flange

Question

Question:

I would like to add an electric jack to my trailer, but I dont want it to interfere with opening and closing my tailgate. Can the head on this unit be reversed to provide more clearance for my tailgate? The tailgate just barely clears the manual jack I have now maybe an inch or two of clearance.

asked by: Jason L

0

Expert Reply:

Yes, you can rotate the Lippert Smart Jack part # LC643589 on the mounting flange for better tailgate clearance.

expert reply by: Jameson C

0

Answer 1

The membrane of the control panel for your Lippert Smart Jack Electric Trailer Jack w/ Footplate #LC643589 is not replaceable but you can use a cover like the Ultra-Fab Protective Cover for Electric A-Frame Jacks #UF38-944020 to prevent further…

view full answer...

Answer 2

We have a few options for an extender that you can use with weight distribution. Depending on the length you need there is the Brophy Hitch Extender For 2" Trailer Hitch Receiver 14" Long #HE12 and Reese Hitch Extender for…

view full answer...

Answer 3

I have a complete replacement jack option for you, but the buttons on your Lippert Smart Jack #LC643589 are not replaceable so the only option is a complete replacement. If your jack is still within the 1-year warranty period then I recommend…

view full answer...

Answer 4

I recommend the Lippert Smart Jack Electric Trailer Jack #LC643589 for your 2004 Keystone Sprinter 320RLS. This jack includes a memory function allowing you to set it to the hitch height for your truck. This allows you to more easily hook up when it…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 9

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 10

There is a trailer wiring harness for the 2020 Ford Edge Titanium with Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C73FR which will plug in behind the tail lights and give you a 4-pole flat on the Edge to power…

view full answer...

Answer 11

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can Lippert Smart Jack be Rotated on Mounting Flange

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching