RoadActive Suspension Enhancement Kit for 2009 Ford F-150 2WD

Question

Question:

I have a 2009 ford f150 2 wheel drive. What is the correct part number for the roadmaster active suspension system? What is the current price?

asked by: Gerald T

0

Expert Reply:

For a 2009 Ford F-150 2WD the correct RoadActive Suspension Custom Leaf Spring Enhancement Kit is item # RAS3611. This system converts your Ford F-150's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway. The current price is on the right side of the product page.

expert reply by: Jerred H

0

Answer 1

Yes, you can use the RoadActive Suspension Custom Leaf Spring Enhancement Kit part #RAS3611-YHD with a weight distribution system on a Ford F-150. The spring bar tension won't be as high with the RAS as it woud be without but aside from that…

view full answer...

Answer 2

What we've found is that the HD version of the RAS systems are the way to go. They provide the best support, stability, and ride quality, and since they are adjustable you don't have to worry about them being overly harsh. For as much sag as…

view full answer...

Answer 3

Installing the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS4611 on your 2019 GMC Sierra 1500 will not void the manufacturer's warranty. Consumers are actually protected from this very concern under the Federal Magnusson-Moss…

view full answer...

Answer 4

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 7

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 10

The Bargman 7-Way, RV-Style Connector #WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...