Can Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless Remote # TVRVR3 Work On Gravel

Question

Question:

I am interested in the RVR3/RVR5. I have several trailers, the heaviest I would use this for is 3200 lbs I have some inclined to traverse between the front/rear yard, about 10 elevation in 100 lateral distance. The surface is 3/4 gravel. Will the RVR 3 work for me?

asked by: Kirk

0

Expert Reply:

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless Remote # TVRVR3 can be used on gravel, has more capacity than you need as it is rated for up to 3,500 lbs, and it can handle inclines of up to 5 degrees.

expert reply by: Jameson C

0

Answer 1

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36"…

view full answer...

Answer 2

When it comes to The Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount - Wireless Remote - 3,500 lbs #TVRVR3-BB225 it comes with the 2-5/16 inch ball. Per the manufacturer The Replacement 2 inch Hitch Ball for Trailer Valet XL…

view full answer...

Answer 3

The Trailer Valet RVR3 - Remote-Controlled Trailer Mover #TVRVR3 that you referenced weighs a total of 45 lbs and and has a trailer weight capacity of 3,500 lbs. The higher rated #TVRVR5 weighs 99 lbs and has a 5,500 lb trailer weight capacity.

view full answer...

Answer 4

To adjust the hitch latch on your trailer's coupler, you will want to adjust the nut at the bottom of the latch. This nut will be tightened or loosened depending on what you need for your coupler. I have attached a diagram showing you the…

view full answer...

Answer 5

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 6

Yes both of the Trailer Valet Remote-Controlled Trailer Dollies #TVRVR5 and #TVRVR3 have internal brakes that are automatic. What this means is that unless you are intentionally moving them they will not move or roll. The 5 is just as ball mount…

view full answer...

Answer 7

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless Remote - 3,500 lbs #TVRVR3 you referenced has a tongue weight capacity of 350 lbs max. The mounting bracket with attach directly to your trailer tongue and has a quick release cotter…

view full answer...

Answer 8

Yes, the Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount - Wireless Remote - 3,500 lbs, part #TVRVR3-BB225, comes with the 2-5/16" hitch ball and mount. We do sell each of these items, the RVR3 Trailer Dolly and the…

view full answer...

Answer 9

I took a look at the manual for the Trailer Valet RVR3 Remote-Controlled Trailer Dolly part #TVRVR3 and the following is what they recommend for storage. "Put the RVR in the transport box/bag delivered from the factory. If the storage box/bag…

view full answer...

Answer 10

Yes, you can use 2 of the Timbren Axle-Less Trailer Suspension Kits #ASR35HDS02 which will give you a total trailer GVWR of 7,000lbs. Do understand you must include the weight of the trailer into this calculation. If you are needing to carry 7,000lbs…

view full answer...

Answer 11

Since there isn't an adapter for the Lock N Roll articulating couplers you wouldn't be able to use the part #TVRVR9 but you could use the Trailer Valet RVR3 part #TVRVR3 instead which instead attaches to the frame of the trailer. This…

view full answer...

Answer 12

If your trailer is 5,000 when you are wanting to move it then you can use the Trailer Valet RVR5 Remote-Controlled Trailer Dolly #TVRVR5 which is rated for 5,500 lbs. If you are wanting to move your trailer and that weight exceeds the 5,500 lb mark…

view full answer...