Interior Dimensions of Malone MPG911 Profile 18B Roof Mounted Cargo Box

Question

Question:

What are the interior dimensions for this roof box?

asked by: Graham B

0

Expert Reply:

The interior dimensions of the Malone # MPG911 Profile 18B roof cargo box are 76 inches in length, 30 inches in width and 14-1/2 inches of height.

I've linked to a demonstration video that you might find helpful.

expert reply by: Mike L

0

Answer 1

According to my research it looks like the factory rack on your 2022 Nissan Pathfinder has a crossbar spread of 28" while the SportRack SkyLine XL Cargo Box #SR29ZR will fit a 21-1/2" crossbar spread. You can certainly drill new holes if…

view full answer...

Answer 2

Yes, you can absolutely install the Malone Profile18B Rooftop Cargo Box #MPG911 with the factory roof rack on your 2014 Cadillac Escalade. This cargo box measures 78-3/4" long x 32-3/8" wide x 15-3/4" tall, has an internal measurement…

view full answer...

Answer 3

The Malone Profile 18B #MPG911 is designed to fit on almost every roof rack crossbar, including aero style bars or factory crossbars. As long as your roof rack system doesn't have crossbars larger than 1"-3" wide and…

view full answer...

Answer 4

The portion of the mounting hardware of the Malone cargo box part #MPG911 that you referenced that hangs below the crossbar is right at 1 inch which should be more than enough clearance for the roof of your 2022 Lexus GX 460.

view full answer...

Answer 5

The Thule Motion XT Rooftop Cargo Box, part #TH629706 will work great with the crossbars on your 2014 Escalade. You can take a quick measurement to make sure the rear hatch will open when the cargo box is installed. You can measure the distance from…

view full answer...

Answer 6

The Malone Profile18B Rooftop Cargo Box part #MPG911 will store up to 18 cubic feet of cargo. The external dimension of the box are 78-3/4" long x 32-3/8" wide x 15-3/4" tall. The box weighs 35 lbs and can support up to 165 lbs of gear…

view full answer...

Answer 7

I recommend using the SportRack Vista XL Cargo Box - Roof Mount - 18 cu ft - Black #SR7018 since it will fit on most factory and aftermarket crossbars and also gives you 18 cu/ft of storage space; all and all this box is great for summer trips and it…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Interior Dimensions of Malone MPG911 Profile 18B Roof Mounted Cargo Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching