Can I Install A Kuat NV2.0 On My 2020 Mercedes Sprinter 2500  

As long as the fender is tightly installed on the bike and the hook is attached to the fender as close as possible to the top tube of the bike, the #BA22B should carry the town bike you mentioned with no problem whatsoever. I spoke with one of my…

From end to end, the extendable arm measures 30-5/16 inches for the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side #PVD20B.

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

Thanks for reaching out! To add tail lights and a license plate to your Kuat NV 2.0 Bike Rack #NV22G I recommend picking up the Curt Auxiliary LED Indicator Lights #C53201 and the Thule License Plate Holder #TH35JV - you'll need to splice in the…

For the license plate, you have two options. You can use the Yakima PlateMate License Plate Holder for Bike Racks #Y02713. This uses a hook and loop strap to attach to your bikes or your rack and is quick, easy, and temporary. The downside to this…

The distance from the hitch pin hole to the nearest portion of the Kuat Transfer Bike Rack #KU84FR is 7-1/2 inches which would be more than enough clearance to allow your bike to fit but even more so if you plan to use the pivoting hitch assembly…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…