What is Weight Capacity of Replacement Ball for Andersen Ultimate Connection

Question

Question:

Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System - 2-5/16 Item # AM3201 looking for wt rating on this ball , thank you ,

asked by: Ken K

0

Expert Reply:

The Replacement Ball for Andersen Ultimate Connection 5th Wheel Trailer Hitch System - 2-5/16 Item # AM3201 has the same weight rating of the adapter it fits of 20,000 lb capacity.

expert reply by: Jameson C

0

Answer 1

The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs #AM3200 uses hitch ball #AM3201 only. It is not compatible with the greaseless AlumiBall #AM3453 which is only compatible with the Rapid Hitch Ball Mount…

view full answer...

Answer 2

The Curt Q20 #C57FR is confirmed to fit 2020+ GM 2500 and 3500 model trucks with the factory OEM Prep Package. The Curt Q20 #C16530-16025 is designed to fit 2016 - 2019 model year GM 2500s and 3500s with the factory OEM Prep Package. GM changed the…

view full answer...

Answer 3

I checked with Andersen, and there is not a replacement steel hitch ball for the Andersen Ultimate Connection #AM3200. The replacement ball for the hitch is an aluminum ball with a zinc coating, which is the following part number: - Replacement Ball…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR I'd go wit the Curt but not the Q25. I'd go with the A25 #C24FR, which is basically the same thing as the Q25 but does not require the #C88KR adapter. Only the Curt is going to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

What is Weight Capacity of Replacement Ball for Andersen Ultimate Connection

Product Page this Question was Asked From

Continue Researching