Truck Bed Camper Tie Downs For 1991 Dodge Ram 250

Question

Question:

Will the Brophy camper tie downs work with a 1991 Dodge Ram 250?

asked by: Bill K

1

Helpful Expert Reply:

Yes, you can use the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB on a 1991 Dodge Ram 250.

expert reply by: David B

1

Answer 1

There are some trucks that the Brophy Clamp On Camper Tie-Downs, part #HSAB will not fit and your 2005 F-150 is among that list. We do have tie-downs that will fit your truck but there are a few things that are required to make sure you get a good…

view full answer...

Answer 2

We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part #HSSF. There won't be any issues with these tie downs and an aluminum bed…

view full answer...

Answer 3

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for…

view full answer...

Answer 4

Yes, the Brophy camper tie downs like the #HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.

view full answer...

Answer 5

The Brophy Slide In Camper Tie-Downs #HSAB might be a fit for your 2011 Ford F-150 but you'll need to do a bit of measuring first and you'll likely need to trim out holes where the tie-downs would sit. You'll want to verify…

view full answer...

Answer 6

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 7

The Angled Hold-Downs for Truck Bed Campers #HSAB should work very well for your 2003 Chevy Silverado 2500. We had a customer leave us a review that said they were very easy to install and reinstall and that it only took a few minutes, so I think…

view full answer...

Answer 8

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 9

The RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS54FR will raise the rear stock height of your 2023 Chevy Silverado 1500 by 1/2" - 1-1/2" according to RoadActive. The variances being the amount of tension you choose to set…

view full answer...

Answer 10

Gen-Y does offer a fifth wheel pin box to gooseneck coupler that can fit in place of the Lippert Turning Point pin box with the part #GY48GR. At this time they do not offer a pin box replacement (no gooseneck adapter) that can fit in place of the…

view full answer...

Truck Bed Camper Tie Downs For 1991 Dodge Ram 250

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching