Brake Controller Install Kit with 4-Way to 7-Way Adapter with Built In Circuit Tester

Question

Question:

Interested in ETBC7, but with integrated tester like the Curt 57674. Do you have something similar?

asked by: Enrique M

0

Expert Reply:

I can help get you what you are looking for but the # ETBC7 as a kit is not sold with a 7-way that has a tester built in. So what you would want is the part # C57674 with the brake controller wiring kit part # 5506 and you'd have what you are looking for.

expert reply by: Jameson C

0

Answer 1

To add a 7-way to your 2022 Grand Cherokee 4XE you will need to start by adding a 4-way connector. The Curt #C27BR plugs into the connection points behind your tail lights, and will allow you to power the signal lights on a trailer. Once this is…

view full answer...

Answer 2

The Tekonsha #118786 is indeed a confirmed fit for your 2022 Jeep Wrangler 4xe. I've personally confirmed this with my contact in the Technical Services department at Tekonsha who tells me that the harness is a fit for ALL models of the 2022 Jeep…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 6

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

If you're wanting to add a 4-way to power your trailer's signal lights then you need the Curt #CU94FR. If you want to add a 7-way to your 2024 Santa Cruz then you can use the Curt #C68JR. Both of these plug into the tow package you referenced…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. The Curt item #C26VV is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 11

In order to add a 7 way connector on you 2020 Jeep Wrangler JL you'll need to start by adding a 4 way trailer connector like the Tekonsha #118786, which gives you the connections needed to install a 7 way connector. Once you've installed the…

view full answer...

Brake Controller Install Kit with 4-Way to 7-Way Adapter with Built In Circuit Tester

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching