Replacement Driver's Side Heated Mirror w/ LED Blinker for a 2016 Chevy Silverado 2500 Diesel

Question

Question:

i need a tow mirror for a 2016 2500 6.6 diesel the mirror is power heated and led blinker in the mirror do you have one for this truck driver side thank you

asked by: Tim S

0

Expert Reply:

Yes, we do have a replacement mirror that is heated and has the LED blinker for your 2016 Chevy Silverado 2500 Diesel. It is the K-Source Custom Extendable Towing Mirror item # KS62136G. This is the drivers side mirror. I have attached a picture so you can confirm this is the same as the ones currently on your truck.

expert reply by: Jerred H

0

2016 chevy 2500 replacement heated mirror drivers side
(click to enlarge)

Answer 1

The K-Source Custom Extendable Towing Mirrors - Electric/Heat - Textured Black - Pair Item #KS62147-48G are confirmed to work with your 2015 Chevy Silverado 2500 and will retain any of the features you truck currently has for the mirrors. I've…

view full answer...

Answer 2

K-Source Custom Extendable Towing Mirrors #KS62135-36G are a confirmed fit for your 2015 Chevrolet Silverado 2500 LTZ with power/heated mirrors. These towing mirrors retain the power, heat and turn signal functions of the OEM mirrors and they install…

view full answer...

Answer 3

The K-Source Custom Extendable Towing Mirrors #KS62135-36G will work for your 2015 Chevy Silverado 2500 but will only give you the functions that you already have on your truck, which means power adjustment and heat but you would not be able to add…

view full answer...

Answer 4

The dealer is referring to a temperature sensor that is placed in the passenger side mirror. The temperature sensor is only present on the 2017 Chevy Silverado 1500 trucks that have a diesel engine. If you have a diesel engine then the K-Source…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

This will depend on if you have disc or drum brakes on your triple axle boat trailer. Disc Brake Kit #HS381-9067 Drum Brake Kit #HS381-9066 Each kit contains the correct electric over hydraulic actuator, 7-way wiring and breakaway components. If you…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...