Can B and W Companion Hitch be Used with Flex Air Pin Box

Question

Question:

i have a Flex Air pin box i bought from you a couple of years ago will the BandW Companion item #BWRVK3300 be a good fit

asked by: Richard F

0

Expert Reply:

Yes, the Companion hitch part # BWRVK3300 is perfectly compatible with a Flex Air pin box.

expert reply by: Jameson C

0

Answer 1

If you're looking for the easiest option to move around (since you plan on using your 2020 Chevy Silverado 3500 to gooseneck tow) then I recommend going with the OEM puck system and using the Companion #BWRVK3710 because it is roughly 50 lbs…

view full answer...

Answer 2

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 3

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

view full answer...

Answer 4

Both of the ARK stabilizer jacks #ARK94FR and #ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the #ARK94FR has a square tube and #ARK87FR has a round tube. These are both going be…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 7

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Answer 8

Since your 2019 F-350 is a long bed you'll be best off starting with the pivot arms of your B&W Hitch #BWRVK3300 installed in the positions that place the hitch head furthest forward, closest to the cab. To do this install the pivot arms with…

view full answer...

Answer 9

The B and W Companion hitch part #BWRVK3305 that you referenced weighs 159 lbs. The head is easily removed to make the install and removal of the hitch easier as well since it splits the weight up. The head weighs 71 lbs.

view full answer...

Answer 10

You'll need to do some slight measuring to ensure the fit of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV on your 4WD 2022 Ford F-350 FX4 dually. Just measure from the top of the rear axle to the top of the jounce…

view full answer...

Answer 11

You are definitely correct that both the B&W Companion #BWRVK3305 and the Reese M5 #RP30922 are fantastic 5th wheel hitches that will work well on your 2019 Ford F-350 but I do recommend going with the B&W Companion #BWRVK3305. The B&W…

view full answer...

Can B and W Companion Hitch be Used with Flex Air Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching