Will The Thule TracRac Base Rails Work With A 2020 Ram 1500 Short Bed And A BAKFlip Tonneau Cover?

Question

Question:

will these rails fit a 2020 Ram crewcab short box 5 1/2 ft bed with a bak flip tonneau cover

asked by: Gerry

0

Expert Reply:

I do have a solution for you, but the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH21782 will not work with your 2020 Ram 1500 short bed.

Instead, I recommend going with the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000965 which will work with your BAKFlip tonneau cover, like the BAKFlip MX4 Hard Tonneau Cover # BAK448227.

This rack is made in the USA, has a maximum capacity of 500-lbs, and also has a tie-down kit # A4000882 so you can quickly and easily secure your cargo available, as well as, the Load Stops for Adarac Truck Bed Ladder Rack Crossbars # A4000880 to help contain your load and prevent it from shifting.

expert reply by: Bryce D

0

Answer 1

The Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style #TH890000 will actually fit Adarac ladder racks such as #A4000965 that you referenced. You do not need any adapter or conversion kit as this kayak carrier will simply clamp onto the…

view full answer...

Answer 2

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 3

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 4

We do offer a few kayak carriers that you can use with the Thule TracRac TracONE Truck Bed Ladder Rack. You will need to use a channel mount carrier. Since the crossbars on the TracOne are a bit oversized, none of the clamp on carriers we sell will…

view full answer...

Answer 5

The correct base rails for your Thule TracRac SR system to move to a 2021 GMC Sierra with 5-1/2 foot bed are the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21782; these are the base rails for the TracRac SR #TH43002XT-782

view full answer...

Answer 6

The BAK Revolver X4 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black #BAK34ZR comes with side rails in the hardware kit. The rails install directly on your 2021 GMC Sierra 1500 Carbon Pro's bed liner. I went ahead and attached the…

view full answer...

Answer 7

Just like the BAK Revolver X2, the Revolver X4 (only difference between the two is the sheen on the tarp) is also compatible with the Thule TracRac SR Truck Bed Ladder Rack you'd looked at, part #TH43002XT-501. As you can see in the provided…

view full answer...

Answer 8

I would be happy to help you! The EZ loader oil bath hub assembly 300-029534 is a complete 5-on-4-1/2 idler hub kit that includes races, bearings, seal, washers, nut, retainer nut and cotter pin, bearing protector and lug nuts. Some of these hubs fit…

view full answer...

Answer 9

Sorry to hear a rail broke on your Thule TracRac SR! The #TH43003XT-785EX you purchased for your '22 Ford F-250 with the 6-3/4' bed does have a limited lifetime warranty so you can see if the rail is covered under warranty depending on…

view full answer...

Answer 10

A slight voltage drop between the controller and the magnets is normal. But you will need around 12 volts at the magnets for proper operation. The only way to know the wire gauge is to strip away the insulation and measure just he copper strands. If…

view full answer...

Answer 11

My suspicion is that you have a poor ground connection somewhere on your trailer. The fact that everything works fine until the running lights are turned on is the dead giveaway. When the tail lights are turned on, the trailer lighting is drawing…

view full answer...