What Tire Chains do You Recommend for My 2005 Dodge Ram with 265/70-17 Tires?

Question

Question:

Looking for a set of appropriate tire chains for 2005 Dodge Ram Diesel. Tire size is 265/70R17E. My question concerns chains needed when I am carrying my slide in camper weighing close to 2000 lbs. Should they be a heavy duty and if so what do you recommend? Thanks for your help.

asked by: Robert

1

Helpful Expert Reply:

For a great set of tire chains on your 265/70-17 tires on your 2005 Dodge Ram, I recommend the Titan Chain Snow Tire Chains w/ Cams - Ladder Pattern - V-Bar Link # TC2828CAM. Not only do these chains come with cam tighteners that help with getting an optimized fit, the V-bar links are a great addition. With the V-bars, the chains penetrate the snow deeper than non V-bar models to give you superior traction. As with all tire chains, since these chains measure 5.5mm thick, I recommend measuring your wheel wells to make sure you have enough clearance in order to use the chains. I went ahead and attached a diagram that shows how to conduct this check. I also attached a video that shows these particular chains used on a 2008 Dodge Ram to show you how they fit.

To take the headache out of having to adjust the chains after each and every trip, I recommend the Titan Chain Multi-Arm Rubber Tire Chain Adjuster # TCMA2.

One of the potential issues you may encounter with adding tire chains to your truck when hauling the camper is decreased wheel well clearance due to sag. When checking your wheel well clearance with the camper installed, if you find you need to eliminate the sag to accommodate the chains, I recommend using the SuperSprings Solo Custom Helper Springs on your rear axle. If you have a 4x4 1500, for instance, that part would be the # SSR-306-47.

In order to confirm which SuperSprings Solo model fits your particular truck, feel free to respond with your submodel of Ram pickup and I will be happy to recommend great springs for you. Also, as with all tire chains, I recommend consulting with your vehicle's owner's manual to make sure you are following all of the manufacturer's guidelines.

expert reply by: Bob C

1

Answer 1

There are not Snow socks like #TCH74 available in the 245/70r19.5 tire size. Nor are there Class-S chains for tighter wheel well clearance. If they will fit, you can use the Titan Chain #TC2828CAM chains that feature a high traction v-bar links

view full answer...

Answer 2

Hello Cory. I can definitely point you in the right direction, but there is not a B&W Companion option that will fit into a round gooseneck ball hole. As you said, the B&W Companion hitch is only compatible with the B&W Turnoverball…

view full answer...

Answer 3

I am far from an expert on snowmobiles but one would have to think such a large truck with the correct tires and chains would be able to make it through up to 2' of snow assuming you have clearance on the vehicle. In regards to the type of tire…

view full answer...

Answer 4

Yes, the Replacement PlusNut Hardware Kit #Y8880039 that you referenced is an optional hardware kit for your Yakima 60" Tracks for Roof Racks #Y01135. This hardware kit is designed for use with sheet metal roof applications.

view full answer...

Answer 5

The correct landing pad to go with the Tracks part #Y01127 is the Landing Pad 1 part #Y00221. Then for control towers you would need part #Y8890027 for individual towers, and then for 48 inch crossbars part #Y8810021.

view full answer...

Answer 6

Yes, the Replacement Yakima Control Tower for Factory-installed Tracks #Y8890027 will fit the now-discontinued Landing Pad 12.

view full answer...

Answer 7

Thank you for the photos! It looks like you have an older Yakima system but we do have the Replacement Yakima Control Tower for Factory-installed Tracks #Y8890027 that will fit. This is sold in a quantity of 1 so be sure to change that to what…

view full answer...

Answer 8

The option that will work for your 2017 Cherokee 29TE depends on your axle diameter. For 2-3/8 inch axles, you will want the Dexter Trailer Springs Over-Under Conversion Kit, #K71-384-00. If you have a 3-inch diameter axle, you will want the kit,…

view full answer...

Answer 9

You do not need to remove the bed of your truck to install the HappiJac part #LC182906-182971 that you referenced. I found a copy of the install instructions for this part number (see attached pictures) and there's no mention of the bed needing…

view full answer...

Answer 10

For your Capri Cowboy truck camper, you can just use any of the Thule Top Tracks for Roof Racks. Thule offers a couple of different lengths depending on the size you need. You'd have to measure the length of your roof and then pick the set of…

view full answer...

Answer 11

Yes, the Curt Trailer Hitch Receiver #C15809 will fit your 2003 Dodge Ram 3500. This receiver is capable of fitting with the factory receiver still installed or no factory receiver present, That is why it looks different from your factory receiver in…

view full answer...