What Front and Rear Helper Springs do You Recommend for My 2022 Mercedes Sprinter 3500?

Question

Question:

I am looking for front and rear axle helper springs for my 2022 mercedes benz sprinter 3500. What do you recommend? I have a 2-wheel drive model.

asked by: Thom

0

Expert Reply:

For your 2-wheel drive model Mercedes Sprinter 3500, I recommend these following springs:

- SumoSprings Solo Custom Helper Springs - Front Axle # SSF-106-47
- SumoSprings Solo Custom Helper Springs - Rear Axle # SSR-338-47

Both of these SumoSpring models will help absorb bumps and shocks while minimizing sway during transport. The great thing about these springs is that once they are installed on your front and rear axles, they do not require any additional maintenance or upkeep. To top it all off, both of these models are 100% made in the U.S.A.

If you need help with the installation process, I linked a video that shows both of these sets of springs being installed on a 2020 model Sprinter 3500. The installation on your 2022 model is nearly identical.

expert reply by: Bob C

0

Answer 1

The SumoSprings Solo Custom Helper Springs part #SSF-106-40 are what I recommend using on a 2021 Entegra Odyssey to prevent front end bounce. These springs will work to reduce bounce by absorbing road shock and vibrations while driving. They are…

view full answer...

Answer 2

As long as the shocks on your 2013 Mercedes-Benz Sprinter 3500 are still in good shape, there is no reason to replace them. However if they are worn out you will notice quite a difference once the replacements are installed. We do not sell shock…

view full answer...

Answer 3

It is possible the SumoSprings Solo Custom Helper Springs #SSR-338-47 will raise the rear of your 2013 Mercedes Sprinter 3500 about 1/2 inch to an inch when installed, with the reason being they replace your less effective factory bump stop. That…

view full answer...

Answer 4

I recommend using the SuperSprings SumoSprings for your 2019 Mercedes-Benz Sprinter 3500. These are a one-time installation that you never have to worry about checking up on and they provide more support (become more rigid) as you load more things…

view full answer...

Answer 5

For your 2021 Thor Axis motorhome built on a Ford E-350 chassis, there are a couple of SumoSprings that fit, both rear springs and front springs: - Rear: SumoSprings Maxim Custom Helper Springs #SSR-106-47-1 - SumoSprings Solo Custom Helper Springs…

view full answer...

Answer 6

For your 2022 Pleasure-Way Plateau TS I recommend the SumoSprings Solo Custom Helper Springs #SSF-106-40 for the front axle and #SSR-338-47 for the rear axle. Adding these helper springs would be a great choice. The springs will help minimize sway…

view full answer...

Answer 7

The SumoSprings Maxim Custom Helper Springs like part #SSR-336-47-1 do indeed offer a better ride quality when compared to the SumoSprings Solo Custom Helper Springs like part #SSR-338-47 which is what I assume you are referring to. However, the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hello John. I can definitely point you in the right direction, but I will need more information from you. Can you tell me the sub-model/floorplan of your 2017 Sunseeker Class C Motorhome? I will also need to know the chassis manufacturer in order to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What Front and Rear Helper Springs do You Recommend for My 2022 Mercedes Sprinter 3500?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching