Diameter and Design of Bottom of GSI Outdoors Glacier Coffee Percolator

Question

Question:

is the bottom of the 3 cup outdoor gsi perculator flat or rounded and I understand it is 4 inch wide ??

asked by: Barbara L

0

Expert Reply:

The bottom of the GSI Outdoors Glacier Coffee Percolator # GSI88MV has a 4" diameter and is slightly rounded inwards.

expert reply by: Jon G

0

Answer 1

There is indeed a trailer hitch receiver that fits your 2024 Subaru Crosstrek Wilderness, from Curt, with the correct part number being the following: - Curt Trailer Hitch Receiver #C13382 I verified this fit with the manufacturer for you, and it…

view full answer...

Answer 2

It wouldn't significantly affect the height of the box. The lower profile of the #INBRP12 would be more to do with the fact that claws wouldn't be grabbing around the bars and instead it would look like the box attaches to the bars…

view full answer...

Answer 3

Algae needs sunlight and carbon dioxide to grow so since the Yakima RoadShower Portable Solar Shower #Y29VR doesn't let light in it can't grow in the main tank and since there won't be air in the semi transparent tube it…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

view full answer...

Answer 6

I do have an option for you but I contacted Fan-Tastic Vent and unfortunatly there are no longer replacement parts available for the 6600R series of vents. You would have to replace the vent with a newer Fan-Tastic Roof Vent like part #FV807350…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Diameter and Design of Bottom of GSI Outdoors Glacier Coffee Percolator

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching