How To Find Correct Replacement Wheels and Hubs for Triton XT10 Enclosed Snowmobile Trailer
Question:
I have a 2003 Triton XT10 enclosed snowmobile trailer. Wheels are 5x8.50x8. What wheels and hubs would I need for this trailer?
asked by: Brandon C
Expert Reply:
I do likely have some options for this trailer but we don't have any way to look up what parts it uses therefore you need to provide some information, namely the axle capacity which should be stamped onto the tag in the center of the beam. It likely uses 2,000 lb axles and in which case you would be looking at either the Trailer Idler Hub Assembly part # CE13110 for 4 lug or part # AKIHUB-545-2-LF-1K for 5 lug. If you have a different capacity you'll need to look through our list below and filter accordingly.
For wheels, we have a few options in 8" diameter like part # AM20021 for 4 lug or part # AM20026 for 5 lug. I have also attached our full selection below for these as well.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Steel Trailer Wheel - 8" x 7" Rim - 4 on 4 - White
- Trailer Tires and Wheels
- Wheel Only
- 8 Inch
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Americana
more information >
Steel Trailer Wheel - 8" x 7" Rim - 5 on 4-1/2 - White
- Trailer Tires and Wheels
- Wheel Only
- 8 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Americana
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Q&A: Can Kodiak Disc Brake Kit Replace TDE46247 Rotors
- Q&A: Stabilizer Jack Recommendation for 4 Corners of Hi-Lo Travel Trailer
- Q&A: Fuse Location for Factory Integrated Brake Controller on a 2011 GMC Sierra
- Article: Trailer Tire Sizing
- Q&A: Depth of the Trailer Idler Hub Assembly # AKIHUB-440-2-2K
- Q&A: Trailer Hub Recommendation for Hub on Trailer with 1-1/16" Spindle Diameter
- Q&A: Replacement Idler Hub that Takes L44649 Inner and Outer Bearings and Has a 4 on 4 Bolt Pattern
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Most Popular Wheel Bearings
- Article: How to Choose the Right Trailer Hitch Class
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle