Looking for 6-Way Tow Vehicle Round Receiver to 7-Way RV Blade Plug Adapter

Question

Question:

Our truck has a 6 round receiver and the travel trailer has a big 7 pin plug. What do we need to adapt? Thanks

asked by: Lawana

0

Expert Reply:

The correct 6-pole round receiver to 7-way blade plug adapter for your tow vehicle to RV hook-up is the Hopkins # 47435 that is referenced.

expert reply by: Lori W

0

Answer 1

For your 2004 Holiday Rambler Endeavor, I recommend you use a 7-way instead of a 6-way and get a connector like the 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring - Vehicle End #HM40975-11998. This kit will give you the…

view full answer...

Answer 2

We do have an Tow Ready Adapter #118710 that will adapt a 7-way Euro plug to a 4-pin US flat. This would require you to have a euro adapter to take the 13 pin on your BMW to the 7-way Euro connector. Since those are both euro connectors you will…

view full answer...

Answer 3

If your vehicle has a combined taillight system, in which the turn signals and brake lamp signal are carried on the same circuit, this adapter will work well for you. The #118710 adapter will plug into the European-style 7-round pin trailer…

view full answer...

Answer 4

We do not have any adapters for a 13-way European to a US 4 way trailer connection. We do have the European Style 7-way adapter to 4-Way Flat #118710. Any adapter from the 13-way we do not carry.

view full answer...

Answer 5

If your truck has a 6-Way round pin connector and the trailer has as 7-Way blade style connector then you would use an adapter like #47435 that your have referenced. This is currently the only 6-Way round to 7-Way blade adapter that we offer. Since a…

view full answer...

Answer 6

What you need is a simple 6-Way to 7-Way adapter, #47435. This will plug into your trucks 6-Way and the trailer will then plug into the 7-Way end. There are 2 ways to wire a 6-Way. Either the center pole will be brakes or 12 volt power. You can…

view full answer...

Answer 7

The blue wire is for brake output power to the trailer brakes. One end connects to the brake controller and the other end goes to the pin in the trailer connector on the vehicle side that is for the trailer brakes. The Adapter 6 Pole to 7 Pole…

view full answer...

Answer 8

To see a couple diagrams that show how the 6-way to 7-way adapter part #47435 is wired up check out the pictures I attached. The 6-way of this adapter has the center pin as the 12 volt circuit. That is the usual circuit that gets moved around on…

view full answer...

Answer 9

The adapter #118710 is the only adapter we carry for the European wiring. It will allow you to plug in a trailer with a 5-way, you just won't have the reverse light function on your trailer. Unfortunately we don't have the 7-way European…

view full answer...

Answer 10

To determine the wire functions on the trailer side 6-Way connector you have a couple of options. First, you can trace each wire back on the trailer to see where they go. Depending on how the wiring is routed on the trailer this could be easy or…

view full answer...

Answer 11

It sounds like your Jeep has 4-pole wiring and you need an adapter such as #HM48925 to connect to your Thule light. If your connector looks like the one shown in the photo of part #118710 then this item will get you set. If your European connector is…

view full answer...

Answer 12

The #47435 that you referenced would be exactly what you would need. This will plug into the 6-way round on your tow vehicle and will give you a 7-way connector for your trailer to plug into.

view full answer...

Looking for 6-Way Tow Vehicle Round Receiver to 7-Way RV Blade Plug Adapter

Product Page this Question was Asked From

Continue Researching