NEMA Code For The Furrion Replacement RV Power Inlet

Question

Question:

what is the NEMA number of the 30 amp connector

asked by: Mark T

0

Expert Reply:

The NEMA code of the Furrion Replacement RV Power Inlet # F30ITSSS is L5-30.

expert reply by: Bryce D

0

Answer 1

The 30-amp RV power cord products we offer, such as the Mighty Cord RV Power Cord with Handle #A10-3025ED90, use the same standardized NEMA TT-30P type plugs. These connectors have their three conductors arrayed in a circular pattern as shown in the…

view full answer...

Answer 2

The Mighty Cord RV Power Cord Adapter #A10-3030D90VP is 12" long. We do have the Mighty Cord RV Power Cord #A10-3025ED90 which has the 30-amp twist lock and is 25' long.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…

view full answer...

Answer 5

I did some research on the ECC because I hadn't really heard of it before and I was able to find out that the ECC is strictly designed for use with 30A services according to the owner's manual. So, upgrading to 50A would effectively get rid…

view full answer...

Answer 6

The amp rating of the control center units like the Progressive Dynamics 60 Amp #PD4560K18LS8 have more to do with their max electrical rating and less to do with what type of receptacle they are compatible with. So, long story short is that you can…

view full answer...

Answer 7

Weight distribution systems that have 2-point sway control generally have sway control just at the ends of the springs bars on the trailer side. On the Fastway systems for example the L bracket that secures the bar to the frame bracket can be…

view full answer...

Answer 8

The rooftop condenser unit can be replaced with a model like the Advent Air Replacement RV Air Conditioner for Dometic Setup #ACDOM150, you'll just want to determine the connector style for the current unit. It will have either a 6-pin or 9-pin…

view full answer...

Answer 9

Sounds like you are looking for something like the Furrion Replacement RV power inlet part #F30ITSSS which uses a ring lock and is also made of stainless steel. I attached a review video for this for you to check out as well.

view full answer...

Answer 10

Since your Venture leg is the follow leg the repair kit is #LC146060. If you had the lead leg it would be #LC146059.

view full answer...

Answer 11

I sure can; I have added a photo for you with the dimensions of the mounting hole for the 50 amp SmartPlug inlet and connector. This comes in your choice of three different colors, and the dimensions are the same for each: - Black: SmartPlug RV Power…

view full answer...

NEMA Code For The Furrion Replacement RV Power Inlet

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching