Recommended Hard Folding Tonneau Cover For A 2013 GMC Sierra With 6-1/2' Bed

Question

Question:

Do you offer a hinged hard bed cover? All I see are retractable.

asked by: John A

0

Expert Reply:

Yes, we offer multiple folding hard tonneau covers like the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK48101. This tonneau cover offers style and versatility with its heavy-duty, all-aluminum design. This quad-folding cover sits inside your GMC Sierra's bed rails and secures upright for unrestricted bed access. Your tailgate opens and closes with the cover up or down. Because this cover sits inside of the bedrails you will also be able to use select ladder racks that mount inside of the bedrail stake pockets so you won't have to choose between a cover or ladder rack.

expert reply by: Kevin C

0

Answer 1

The issue that you'd most likely run into with the BakFlip you have #BAK48101 and the TracRac SR part #TH43002XT-501 is that the base rail of the TracRac rests slightly over the inside edge of the truck bed rails like you can see in attached…

view full answer...

Answer 2

Since the BAKFlip MX4 Hard Tonneau Cover #BAK48307 that you referenced mounts flush against the inside of the bed rails on your 2013 Ford F-150 it is not compatible with the Buyers Products Super Track Kit #337ST93. The only kind of tie-down anchors…

view full answer...

Answer 3

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 4

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 7

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 8

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 11

Great news Rick. The Firestone Ride-Rite Air Helper Springs #F2609 is compatible with the adaptive ride control on your 2024 GMC Sierra 1500 Denali. You can pair this with the Firestone Air Command #F56VV so you will be able to easily adjust the air…

view full answer...

Answer 12

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...