Will the Demco 50-Degree A-Frame Trailer Coupler Fit an ATC Trailer

Question

Question:

Will this fit a 2019 ATC 24 ft trailer

asked by: B B

0

Expert Reply:

The Demco 50-Degree A-Frame Trailer Coupler part # DM16680-52 will fit any trailer with a standard 50 degree a-frame which is almost all a-frame trailers on the market today. Therefore, yes, the Demco 50-Degree A-Frame Trailer Coupler will fit an ATC trailer. You'll simply need to mount the coupler, use the holes as a template to drill your own, and then you can continue bolting on as normal.

expert reply by: Conner L

0

Answer 1

Yes, so long as you have a standard a-frame trailer you will be able to replace your current welded on coupler with the Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2-5/16" Ball - 21K item #DM13205-95. I have attached…

view full answer...

Answer 2

Yes, you will be able to replace your stock coupler with the Demco 50-Degree A-Frame Trailer Coupler #DM13205-95 as long as you have a standard a-frame trailer. I attached a picture below of the dimensions below so you can see if it would work for…

view full answer...

Answer 3

The Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole item #DM13205-95 that you referenced will fit a standard a-frame trailer. This is a bolt on coupler so you won't have to borrow a welder. To install you will want to use 3/8 inch, grade 5…

view full answer...

Answer 4

The Demco coupler part #DM16680-52 that you referenced can be either bolted on or welded on. You would not need to do both to securely install it.

view full answer...

Answer 5

I checked the Featherlite Trailer website for specs on the model 3116 trailer but this part number returned no results. But if your trailer uses an industry-standard 50-degree a-frame design then the Demco A-Frame Trailer Coupler #DM16680-52 will fit…

view full answer...

Answer 6

The big difference between the two couplers you mentioned is that the Demco #DM13205-95 does not come with chain anchors and the part #DM16680-52 does.

view full answer...

Answer 7

Yes the Demco 50-degree A-frame coupler part #DM16680-52 does fit the standard a-frame of your 2007 ATC car hauler.

view full answer...

Answer 8

Generally the Demco A-Frame Trailer Coupler w/ Jack Hole part #DM14793-81 is very easy to release. There is a lock/pin hole located just under the latch that may have a pin in it preventing it from opening. I have linked a photo showing exactly where…

view full answer...

Answer 9

The Bulldog Heavy-Duty A-Frame Coupler, #BD44150WH301, does not come with the attachment bolts. I have attached two images showing the bolt pattern measurements and the bolt hole sizes. I would recommend using grade 8 bolts, but grade 5 is acceptable…

view full answer...

Answer 10

Thanks for that photo, I do appreciate it. And all of the couplers we have - and indeed all the ones I am aware of - require a frame that is fully engaged. While Demco was not able to provide a dimensional drawing, we did measure the Demco 50-Degree…

view full answer...

Answer 11

The 50 degree a-frame trailer angle is the standard angle for a-frame trailers so it would be almost guaranteed that this Demco Coupler part #12660-97SP would fit perfectly. I don't have a way to open your picture but as long as the frame members…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Will the Demco 50-Degree A-Frame Trailer Coupler Fit an ATC Trailer

Product Page this Question was Asked From

Continue Researching