Is There Difference Between ThinLine LED Clear and Red Lens for Tail Light Strip STL64RB

Question

Question:

Do you recommend the clear or red lense tail, brake and signal 20 inch STL64 LED light? I will be adding these to my Grand Design Momentum 397 Toyhauler in addition to the existing OEM lights. I mainly travel in the day.

asked by: Mike D

0

Expert Reply:

Picking between the ThinLine LED trailer taillight part # STL64RCB which is clear and the # STL64RB which is red really comes down to which you like the look of better. If you like the look of the clear lens then go with it, I would probably go with the red lens as I am sure most of your Grand Design lenses are currently red.

expert reply by: Jameson C

0

Answer 1

The wiring of the Thinline trailer light #STL64RB is a 16 gauge so sticking with that would be a good idea I'd say. We offer 16 gauge wire by the foot with part #16-1-1 as well.

view full answer...

Answer 2

Since you are keeping your current taillights on your Grand Design 303RLS I recommend the ThinLine LED Trailer Tail Light #STL64RCB over the #STL64RB as they have a clear lens. When you use these during the day there will be a more pronounced…

view full answer...

Answer 3

While the RockyMounts MonoRail Bike Rack for 3 Bikes - 2" Hitches #RKY10004-10005 is a superb choice for a Tesla Model 3, I verified that it is not rated for use behind an RV, including motorhomes (it had been at one time but RockyMounts…

view full answer...

Answer 4

There is only one 2 bike rack rated to be used on a flat towed vehicle, the Yakima HoldUp EVO Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount Item #Y02480. It only has a max weight capacity of 40lbs per bike and is not rated for use on…

view full answer...

Answer 5

You should contact Coachman and ask how many pounds their rear bumpers are rated for. Most are not rated for any weight. Small trailer bumpers are notorious for falling off as you travel down the road if loaded. IF it is rated for a few hundred…

view full answer...

Answer 6

There are only certain bike carriers that can be used at the back of an RV. And since you are looking for a platform style and want to carry at least 3 bikes there are 2 options. We have the RockyMounts SplitRail, #RKY11404-3, and the RockyMounts…

view full answer...

Answer 7

Thanks for the axle information, Mike! Here are the correct parts according to my contact at Curt: - Bearing #02475 and Race #02420 - Bearing #25580 and Race #25520 - Grease Seals #RG06-070

view full answer...

Answer 8

Yes you are correct in your assumption. On the Optronics Thinline LED #STL64RB, the Red wire is for turn signal, so this will go either the green or yellow wire on your trailer. The black wire is tail lights so this would go to the brown wire on…

view full answer...

Answer 9

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328…

view full answer...

Answer 10

The video review for the Optronics Thinline LED Trailer Tail Light #STL64RB that you mentioned is correct. The white wire is for ground, the black wire is for tail lights, and the red wire is for turn/brake signals.

view full answer...

Answer 11

The Thinline LED Trailer Tail Light part #STL64RB is a three function light with those functions being stop, turn, and running. It has a three wire design with the white wire being ground, the black wire for the tail lights, and the red wire for…

view full answer...

Is There Difference Between ThinLine LED Clear and Red Lens for Tail Light Strip STL64RB

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching