What Is The Furrion RV Tankless Water Heater Door Made Of

Question

Question:

What is the door made of? Metal or plastic?

asked by: Nicole

0

Expert Reply:

The door of the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 18" Door # FR48SR is made of metal.

expert reply by: Kevin C

0

Answer 1

Switching to a tankless water heater to replace your Atwood GC10A-4E is a really smart idea and the best option to replace it is from Furrion: - Furrion RV Tankless Water Heater - 18" x 18" Door #FR68SR The #FR68SR will fit easily…

view full answer...

Answer 2

The direct replacement for your Atwood Gc6aa/10E water heater has been discontinued. I recommend the Atwood RV Water Heater Item #DMC74FR which only requires a 12-3/4" x 12-3/4" cutout. This is a standard gas and electric, 10,000…

view full answer...

Answer 3

Unfortunately Atwood went out of business awhile ago and there's no longer any direct replacements available for their water heaters. That being said, the dimensions of the Atwood GC6AA-10E are very similar to the other units so you…

view full answer...

Answer 4

The Furrion RV Tankless Water Heater #FR48SR would be a great replacement choice for your Atwood GC6AA-10E RV water heater. This unit has a BTU rating of 60,000 versus the 8,800 BTU rating of your current water heater. The on-demand hot water and…

view full answer...

Answer 5

Yes the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 18" Door #FR48SR is a great replacement for an Atwood GC6AA-10E. It does have slightly smaller dimensions so your cutout hole will need a little…

view full answer...

Answer 6

I recommend the Furrion RV Tankless Water Heater #FR48SR for your 2017 Jayco Redhawk 26XD. This water heater only requires a 12-5/8" x 12-13/16" cutout so you will have no trouble fitting it in your larger opening. A 18"…

view full answer...

Answer 7

If you can get 120V power to a newer model then it will work (you don't want to try powering 120V with a 12V power source) but in any case we actually carry some 12V tankless water heater options from Furrion that you might be interested in!…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What Is The Furrion RV Tankless Water Heater Door Made Of

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching