Replacement For FIC Entry Door Locking Latch on Travel Trailer

Question

Question:

I have a 2015 Keystone Hideout Travel Trailer. I need a new latch/lock because the one I have broke. Hopefully you have one I can install without needing to drill any extra holes or make room for a new one? Im not very handy with this kind of stuff so the easier to install the better. It looks to be a FIC and this is the main entry door. Thank you!

asked by: Kristen

1

Helpful Expert Reply:

Appreciate the photo and we have the exact replacement you need for your FIC entry door locking latch, which is an option from Global Link:

- Global Link RV Entry Door Locking Latch Kit # 295-000019

The Global Link Latch Kit # 295-000019 will be a direct replacement for your FIC and you won't have to drill any new holes, and this will line up in the same spot as your current entry door lock. It even comes with new screws so you can easily just remove your old latch and install this new one.

expert reply by: Kyle S

1

FIC Entry Door Locking Latch
(click to enlarge)

Answer 1

The Global Link Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 7/8" Long #295-000003 are items that can be also used by other RV owners. The possibility that another owner has your same key is more rare than you…

view full answer...

Answer 2

There may be a solution for you with the Global Link RV Entry Door Locking Latch Kit #295-000019. This is a replacement for a standard entry door lock from a number of manufacturers including Fastec (FIC). It is 3.47" wide x 4.28" tall,…

view full answer...

Answer 3

The only style of lock cylinders we carry for doors are for cam locks which would not be a compatible replacement for your Fastec (FIC) lock cylinder. To get both of your doors keyed the same you would need to replace both door latches with new ones…

view full answer...

Answer 4

We carry only a few entry door locking latch kit, like #295-000019, and all have the same basic measurements which is the standard size on most RV door. The door locking latches measure 3-15/32 inches wide x 4-9/32 inches tall. What that means is…

view full answer...

Answer 5

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by…

view full answer...

Answer 6

I took a look at the Bargman Door Latch 10-30-051 that you referenced and it is indeed oversized. The best option we have to replace this would be the Global Link RV Entry Door Locking Latch Kit part #295-000019 which can install in an opening up to…

view full answer...

Answer 7

A trailer that is over 80 inches wide is required by DOT regulations to have rear clearance lights. An over 80 inch taillight kit, like part #TL16RK, will have the side clearance light built into it. An under 80 inch taillight does not have the…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The Bauer Products Camper Door Lock #BA65FR will work great as a replacement for your current TriMark door lock. This door lock will fit cutouts that are 5-1/4" wide and 4-1/2" tall, and can also be keyed alike to other Bauer locks, so you…

view full answer...

Answer 10

The #AT91367 will not work with your Atwood OD-5001 water heater. Like you mentioned, the replacement boards have been discontinued, so really the only option we can offer is a new water heater. I fully realize it's not what you are wanting to…

view full answer...

Answer 11

Hey Cory! Yes, the Global Link RV Baggage Door Slam Latch #295-000015 will fit with a 1-1/4" thick door. If you don't have a mounting plate then you'll also need the part #295-000016 to complete the installation.

view full answer...