Which Load Bar Fits Yakima LoadWarrior Cargo Basket

Question

Question:

do you know which accessary bar works with the Yakima Load warrior extension for cargo packet? Yakima 8007074 MEGAWARRIOR ACCESSORY BAR

asked by: Christiane

0

Expert Reply:

For the Yakima LoadWarrior cargo baskets like the # Y07070 the correct load bar is the part # 8870042.

expert reply by: Jameson C

0

Answer 1

The tubing that the Yakima LoadWarrior Cargo Basket is constructed of also has a 1 inch diameter. The top tubes of the LoadWarrior are 38-1/2 inches apart, if the sides of your basket are closer than that, you'd need to shorten the load bar.

view full answer...

Answer 2

Have you tried adjusting the load bar? If you could email me a photo of the issue that may also help me figure out what the issue is.

view full answer...

Answer 3

The Accessory Bar for 40" Wide Yakima OffGrid Roof Cargo Basket #Y07353 has a piece of the assembly that is a composite plastic, however the part that actually attaches to the bottom of the bar is metal as is that adjustment screw.

view full answer...

Answer 4

In order to use the Yakima FatCat Evo6 #Y03096 with the Yakima LoadWarrior Roof Rack Cargo Basket #Y07070 you will need to mount the FatCat Evo6 on the Accessory Load Bars #8870042. The bars of the basket are too narrow to properly mount the…

view full answer...

Answer 5

For your Yakima Loadwarrior cargo basket #Y07070 you would want the part #8870042 as this is the correct loadbar for the Loadwarrior.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Which Load Bar Fits Yakima LoadWarrior Cargo Basket

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching