Parts Needed to Add Brakes to TNT 5x8 Enclosed Trailer with 3,500 lb Axles
Question:
Hello, I recently bough a TNT 5x8 enclosed trailer and would like to add electric drum brakes to it. My axle is equipped with a mounting flange, so Im assuming it is possible to add them. The GVWR says 2990lbs and the GAWR rating says 3500lbs. Which kit do you think will work for me? Also, are the drums sold separately from the electric brake kits? Thanks for your help.
asked by: Sehon
Helpful Expert Reply:
For the 3,500 lb axles of your trailer you will use 10 inch assemblies. For that you'd want the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These assemblies will work well for your axles and they do not require any adjustment since they do that automatically. Then for hub/drums you'd want the Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased # AKHD-545-35-EZ-K and you'd be set.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Optronics Trailer License Plate Light - Incandescent - Gray Housing - Clear Lens
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti
- Shop: Brake Controller
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 - Pre-Greased
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Search Results: brake backing plate
- Search Results: brake flange
- Q&A: Adding Electric Trailer Brakes to Homemade Trailer
- Search Results: wiring
- Q&A: Parts Needed to Add Electric Brakes to a Utility Trailer with a 3500 Lbs Axle and Brake Flanges
- Video: Dexter Trailer Hub and Drum Assembly Installation 8-247-50
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: 25580
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Search Results: brake controller
- Video: Choosing the Right Brake Controller
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Search Results: 90160
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Shop: Gooseneck Hitch