Are Replacement Screws for Rack'Em Fitz-All Enclosed Trailer Ladder Rack # RA-28Screws Stainless?

Question

Question:

Are these replacement RA-28 Screws screws stainless?

asked by: Jeff S

0

Expert Reply:

Yes, the Replacement Screws for Rack'Em Fitz-All Enclosed Trailer Ladder Rack # RA-28Screws are stainless steel.

These screws will replace all the screws for the Rack'Em Fitz-All Enclosed Trailer Ladder Rack # RA-28

expert reply by: Bud M

0

Answer 1

I called my contact at RackEm and asked about the Fitz-All Enclosed Trailer Ladder Rack, part #RA-28 and your all aluminum trailer. They told me that two sets would be ideal for your trailer since it is 12-ft long and the load capacity would be…

view full answer...

Answer 2

If your cargo trailer does not have a steel reinforcement that runs along the top of the trailer wall, you will want to reinforce the installation points so that the Rack'em Fitz-All Enclosed Trailer Ladder Rack #RA-28 installs securely. I spoke…

view full answer...

Answer 3

The Rack'em Fitz-All Enclosed Trailer Ladder Rack #RA-28 has a 400-lb total weight rating for its two adjustable crossbars so I would expect that it will be up to the task of handling your extension ladder. As a check I looked into the weight of…

view full answer...

Answer 4

The weight capacity for Rackem Fitz-All Enclosed Trailer Ladder Rack part #RA-28 at a 7 ft width is 400 pounds. These racks are designed for fiberglass ladders, if you need more capacity another set can be added to spread the weight out more.

view full answer...

Answer 5

There are not really any specifications on where to install the Air Lift WirelessONE Compressor System #AL25980, but there are specifics in the installation instructions on page 6 when it comes to places where NOT to install it. If you choose to…

view full answer...

Answer 6

Hardware is included with the Rack'em Fitz-All Enclosed Trailer Ladder Rack #RA-28. I have included a picture of it for you.

view full answer...

Answer 7

For an enclosed cargo trailer the Rack Em Ladder Rack part #RA-28 would be a great option. It has a 400 lb capacity and can telescope to fit roofs that are between 4 feet and 8-1/2 feet wide.

view full answer...

Answer 8

In the hardware you are using is too long then going with slightly shorter screws is permissible as long as they are the same style and grade as the original hardware. I would take some of the hardware with you to a hardware store and compare them to…

view full answer...

Answer 9

Yes, the Pack'em Ladder Rack Bracket Kit, part #PK-28B, is designed to work with the rain gutters of your enclosed trailer. Really, you want to ensure that rack will stay level so that the crossbars will be parallel with the roof. Looking at a…

view full answer...

Answer 10

For the barn door on your dump trailer, I recommend looking at the Cam-Action Lockable Door Latch Kit #383200. This is a nice steel cam-action door latch with a 1 inch wide hasp that can be installed flush on doors with a 3/4 inch offset. It features…

view full answer...

Answer 11

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Are Replacement Screws for Rack'Em Fitz-All Enclosed Trailer Ladder Rack # RA-28Screws Stainless?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching